Search results

  1. T

    Ford 3000 carb problems on hill

    I'm helping a neighbor on a 1974 3000 gas. I got it to run great, starts great but when he is mowing the ditch and gets it on an angle it will sputter out and die. Pull it to level it will sputter some but then clean out and run great again. I have tried float at a couple different settings...
  2. T

    1600 timing???

    Working on a 1600 gas, it had a full tune up and carb rebuild was running through the summer great. Fired it up brought it out of shed then it all of a sudden started to load up, slobber and die. Will not start now. it has fire and I put a good running carb off another tractor on and still...
  3. T

    1255 Hi-Crop oil psi

    I recently bought a 1255 hi-crop out of California that a friend had owned for many years. When I got it here I serviced all the fluids and filters. Now if I let it sit for more than a couple days without starting it it loses prime on the engine oil and I show no psi. If i pull the filter and...
  4. T

    1650 cooked PTO clutch

    I'm working on friends 1650. Tractor was on a grinder mixer and the PTO was fried by the prior owner. It is a dual speed. I removed the cover plate and the outer snap ring on the shaft, however the inner snap ring is not lined up with the access hole and of course it is all frozen. Any ideas...
  5. T

    1945 101 sr

    I recently picked up a 1945 fully restored 101 senior at what I thought was a very reasonable price. It runs perfectly and other than some checking on the rear tires it needs nothing. I don't know much about these. Are they desirable tractors?? most Massey's I see are newer models...
  6. T

    Hiller with 4 stroke

    I picked up a Hiller a couple of years ago that is different than all the others I have seen. Most had the 2 stroke engine under the seat area. My frame looks factory and is set up for a Briggs type engine. I put one in however I cant figure out correct gearing and clutch set up. I used a go...
  7. T

    66 transmission oil smells burnt

    I opened up my super 66 and the trans oil is black like it came out of a diesel engine and it smells burnt. Everything looks fine, I just can't figure what would cause this in this type of system. This tractor has been sitting for years and I have not seen it move yet. thanks Mike
  8. T

    66 shaft coupler and top shaft

    I need a top shaft for my super 66 and the coupler. I see Korves has the top shaft does anyone know if the coupler is still available. thanks Mike
  9. T

    66/super66 trans case

    My super 66 has a crack in the trans-diff case. Could i use a case from a 66 with disc brakes. It all looks the same on the outside. Thanks. Mike
  10. T

    injection pump rebuild $$$$$

    Whats the going rate to have a roosa master pump rebuilt. I think my 1855 is in need.
  11. T

    oliver spotting on Avis ad

    Just saw a new ad for Avis rental cars and I saw a 1365 4wd in the back ground. Finally a commercial with out the other green tractor in it.
  12. T

    1855 still struggling

    I pulled the return line off and there is some fuel coming out from the pump. The intake filter fitting broke as i was removing it but a got Another one it now. It still will fire right up each time but then falls off. The longer you let it sit the longer it runs good but now that is no...
  13. T

    1855 no power = fuel pump. ???

    Needs some help soon. 1855 diesel. No turbo, running other day it started to sputter like running out of fuel or plugging fuel filter. I got new filter. its full of fuel. I was running down road and it started sputtering again very bad and no power at all. I pulled it home and changed fuel...
  14. T

    New mower from Allis pic

    Sorry, I could not help myself. I got this new mower with a few stickers from e-bay and I'm mowing with a new mower from Allis Chalmers
  15. T

    550 in the field pics

    I did this tractor with my neighbor Jack four years ago. He wanted to play with it so he disced a few acres for me. There are Corvettes that dont live as well as this 550.
  16. T

    62W baler parts

    I was given an Oliver 62 W baler with a 2 cyl Wis engine on it a few years ago and it is to far gone to restore and I am moving out of state. It was parked and did not run for years and everything is there. If there are any parts one of you guys need let me know before it goes to scrap. Out...
  17. T

    Dupont Imron paint codes for Larry

    Red = #1664, Green = #5316, Yellow = #Q1258. I believe the green and red were spot on. I thought the yellow might be a bit light however in contrast it really came out good. I had a pro shoot the tin work I did all the rest. The 550 is the martin senour codes that are bad
  18. T

    no rose parade for me

    Well I did not get picked to drive my super 55 in the Rose parade. The giant tractor pulling the main float looks like a Oliver 70 row crop. Boy they better have some real Oli's in that parade.
  19. T

    HPOCA web site invasion

    Has anyone noticed what is being posted on the HPOCA web site. These knuckleheads are advertising clothes and shoes etc etc. If you check the member list it is now up to 133 pages of members and by far majority are not real people. I don't know what is going on maybe BAStarr will have an idea...
  20. T

    806 trans problem

    Looking at a 806 been sitting for years due to tranny problem. I'm not familiar with farmall so forgive me first. I believe the high low lever is stuck it looks like some one had disconnected it on top of the tranny. My question. Is this a common problem. Do I go in from the side to...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top