(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. R

    Another Carb problem

    Still working on my 8N, it's a work in progress. It's running good, but decided to rebuild the carb this early fall, it was leaking like a sieve, worked with guy who is a master engine rebuilder, got the rebuild kit along with new float, cleaned soaked painted and put all new parts in it...
  2. R

    8N Carb

    I just did my first carb rebuild, it took awhile, I was diligent. It started up right away, did a little adjusting and seems to run fine, less smoke now when reving it up no smoke when running. Just a couple of questions, it sputters at idle, but under a slight load at idle run smooth...
  3. R

    My 8N

    I would like to thank all that helped me get my 8N running during cold snap, I followed everyone's advice, and presto got it moving just in time for the big snow dump last night, it ran like a charm, did its job, moved alot of snow, thank you all. Yippee
  4. R

    My 8N

    I have seen a few people post about having trouble starting their 8N. Where I live now it is about 15F outside, my N is in a non heated garage, I have no problem starting, but that is as far as it goes, I let it warm up for about 5 min, but if you just try and release the clutch, even just...
  5. R

    More carb questions

    I want to get another original carb to rebuild, for a spare, I am ordering from South of my border because there is nothing on my side of the border, I have a son who lives down south who can purchase it and ship it to me. But the questions are, I've seen a few, they say they are from an 8N...
  6. R

    Carb

    this is probably the millionth question about this but here goes, are all after market carbs made the same if not who makes a better one. I want to rebuild my OEM carb but would like to put another one on to run it while I'm rebuilding, just wondering. I'm not a fast rebuilder and sometimes...
  7. R

    My 8N

    Just asking, seen UTF fluid on sale near my place, Ford New Holland M2C41A/B is that any good for my 8N?
  8. R

    My 8N

    I want to load my rear tires, what is the best stuff to use, do I need a pump, and every other question that goes along with it.
  9. R

    My 8N

    Here is picture of my 8N with wheels painted, cleaned them all up wire wheeled them, primed painted, keep tires on, it was just easier for me, tires will be replaced shortly, the hood is next years project, notice the amount of room I have,not much. Sorry if it is sideways
  10. R

    My 8N update

    As I've posted before I'm getting new tires for my N. I'm redoing my wheels and repainting them, I think they look good, I'm cleaning it all up and going to repaint the whole thing eventually, because I want to. Restoring it from top to bottom I wish but don't have the space to do it, like...
  11. R

    My 8N paint

    I'm going to be doing a some painting on my N I know I won't be able to match original colour 100%, but will do the best I can. Just want to know the colour scheme, like rad cap steering wheel seat and other stuff that might be helpful. Thanks
  12. R

    My 8N more tires

    I'm replacing the tires on my 48 8N they are dry rotted afraid to drive it, pieces might fall off. Right now they have Firestone champion ground trac on it. 1,098 for all 4 tires, tubes taxes, and labor, CDN. Is that a fair price.
  13. R

    My 8N Tires

    Trying to find the age of tires on my N, the date code is 518254yz. Anybody have any idea?
  14. R

    My 8N Tires

    I want to replace the tires on my 48N they are cracking really bad, I have no idea how old they are, looks like 1 of the fronts has been replaced. Is there any way to check the age of these tires, the rear are 10 x 28 Firestone with a serpentine type tread and the front 4 x 19 one has three...
  15. R

    My 8N

    How hard is it exactly to replace the front tires on an 8N, been watching a few you tube videos, looks like breaking the bead would be the hardest, saw one guy doing it with a couple, looks like 8 inch screw drivers, he had a hard time, another guy with some bigger pry bars had alot easier time...
  16. R

    My 8N

    Today noticed that one of my front wheels had a little play in it. Decided to take off the dust cover and give it a little tweek, when removed I could not believe the amount of grease inside the spindle, you couldn't put anymore in it, YOU DON'T need all that grease, will someone please explain...
  17. R

    My 8N

    Just installed a front loader on my 8N, and me trying it out, moving stones, moving top soil, and oops, Boulder is a little to much.
  18. R

    Another starting issue

    I've only had my 8N for a couple of years now, and once I figured it out it would start perfectly in about 1 or 2 cranks, hot or cold. Now for the last couple of weeks not so much. I tries to start after about 5 or 6 cranks, then about 1 cylinder at a time, of course when that 1 cylinder fires...
  19. R

    Fuel valve

    Something new has happened today, went into the garage and smelt gas, went around to my 8N and there was a big puddle of gas on the floor. Checked fuel valve and it was turn off, it was leaking from the intake side of the carb. So I found out 2 things, float valve on carb is not working to...
  20. R

    My 8N

    just a simple little question, since I have all the time in the world right now, the rear blade that I use for snow removal, I know its not that time of year, blade guard for the blade to prevent it from marking up cement drive ways, is there anything on the market or can a person make their...
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top