Search results

  1. L

    Removing damaged quill shaft #25 how

    How did you get it moving?
  2. L

    Psb injection pump seal kit

    Thanks everyone
  3. L

    Psb injection pump seal kit

    I have a Cockshutt 550 with a psb injection pump. I am looking for the seals. Either orings or the square rings to seal the hydraulic head. Does anyone know where I can get them? Thanks Lloyd
  4. L

    PSB injection pump hydraulic head replacement

    My Cockshutt 570 starts good cold, runs amazing but won 't start hot. I am assuming that the plunger in the h]pump is worn enough It wont pump enough fuel to start hot at cranking speed. Has anyone ever tried on of the military heads off ebay?
  5. L

    1750 Front Tires

    You will see very little difference in drawbar height. Going from 18s to 15s raised mine less than 1/4 inch
  6. L

    1750 Front Tires

    I swapped the 7.5 x 18 fronts on my 1850 for 7.5 x 15 fronts. I only use the tractor for antique tractor pulling. The front end sits lower. It steers fine.
  7. J

    gasket sealer?

    I am replacing the head gasket on a 1960 diesel fordson super major, i am new to this kind of work and i ask, do i need any kind of gasket sealer like permatex for the head gasket, manifold gasket, thermostat gasket or valve cover gasket?
  8. T

    Chouteau Pull Results are Posted

    I finally got the results posted for Chouteau Okla pull. Sorry for the delay. Don't forget the pull tomorrow at Wagoner at 5:30. Results
  9. C

    John Deere 4630 quad range

    I have a John Deere 4630 I just bought 6200 hrs on it and when I m in c range and shift from 2 to 3 it will pop out of c range and go into d range just wondering if anyone has any experience with this I m hoping an adjustment can be made or something thanks in advance
  10. L

    Cockshutt 550 diesel injection pump ( Cockshutt built)

    Thanks Diesel Tech I must not have explained the rotation correctly. My head is marked as counter clockwise rotation. Or does the rotation of the head really matter? Is the arrow on them because of a difference in the plunger? or for another purpose? My email is...
  11. L

    Cockshutt 550 diesel injection pump ( Cockshutt built)

    I am working on a Cockshutt built 550 diesel. The injection pump is an American Bosch PSB4a. The hydraulic head is a counter clockwise rotation with an 8mm plunger. The plunger in the hydraulic head is twisted off. If anyone has one, or has any suggestions where I might find one. I...
  12. L

    American Bosch PSB4a injection pump parts

    I sent an email. But it says email address not found
  13. L

    American Bosch PSB4a injection pump parts

    Where are you located? my email is [email protected]
  14. L

    American Bosch PSB4a injection pump parts

    If only the previous owner knew that I was just wondering if anyone had a used one kicking around
  15. L

    American Bosch PSB4a injection pump parts

    Hi I have a Brantford built Cockshutt 550 diesel with an American Bosch PSB4a injection pump. The plunger is twisted off. Any suggestions where I might find a replacement hydraulic head?
  16. L

    Cockshutt (Brantford built) 550 diesel injection pump

    I am working on a Cockshutt built 550 diesel. The injection pump is an American Bosch PSB4a. The hydraulic head is a counter clockwise rotation with an 8mm plunger. The plunger in the hydraulic head is twisted off. If anyone has one, or has any suggestions where I might find one. I...
  17. L

    Cockshutt 550 diesel injection pump

    I have one. The previous owner tried to start the tractor after it sat for a few years. I have yet to remove the hydraulic head but based on what I have done and found tinkering with it. My assumption is that the plunger is broken. I would be interested in an entire pump or a complete...
  18. L

    Cockshutt 550 diesel injection pump

    Does anyone have any suggestions where I could get an injection pump for a Brantford built 550 diesel?
  19. S

    Case 1840

    Long time reader, first time poster. I bought a case 1840 skid steer project machine. I had to put a few new hydro lines and rebuilt the twin pump for the drive system. The arms and bucket tilt were working fine prior to the replacements. After fixing the pump and lines, the arms will not...
  20. M

    67 Ford 2000 Fuel Pump Alignment??

    Good Sunday to everyone! Take a lot at these pictures and let me know whether you think the fuel pump is in time. The previous owner of the tractor said he took the tractor to a local mechanic to get the fuel pump rebuilt. I m not sure why he did that. I ve kinda thought the tractor may have...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top