Search results

  1. T

    Case 580B

    I have a Case 580B that needs a R.H. Steering arm and a R.H. Front wheel spindle. Does anyone know if there are any good used ones out there or inexpensive after market ones and where I can buy them. I'm in Ontario, Canada. Thanks Terry
  2. T

    TDC 5

    Is there a method to removing the pins on the track chain. I tried hammering them out but that didn't work. Terry M.
  3. T

    Case 580 B

    Thanks for the reply Dan. The reason I need a smaller bucket is to dig foundations for monuments in cemeteries. If your hear of one for sale, let me know. Thanks Terry M.
  4. T

    Case 580 B

    I'm looking for a backhoe bucket to fit my Case 580 B, that would be 12" to 16" wide. Does anyone have a source for such an item? Thanks, Terry M.
  5. T

    IH 434 Gas

    I have an IH 434 Gas tractor that won't start. It turns over and catches but won't run. Gas pump pressure is good and I had the carburator rebuilt last year. It seems as if it is starving for fuel but I'm not knowledgeable enough to tell if the carb is really set up right. It ran after the...
  6. T

    Case 580 B

    Have a 580 B and the hydraulic swivel joint on the boom leaks badly. I tried to rebuild it with new "O" rings but it still leaks as bad.(Probably too worn). A new one was listed at $260.00 and I can't afford that. Does anyone know where I might get a good used one or can I put a solid block in...
  7. T

    580B Diesel

    I followed the suggestions from my last post and changed the fuel filters. The engine seems to run stronger but it still won't pull with a load in the bucket in 2nd or 3rd gear. 1st gear is not too bad but very slow. The transmission reads full on the dipstick but the fluid is frothy. Is this...
  8. T

    Case 580 B Diesel

    Gene, thanks for the help. I will follow your suggestions and hopefully be able to repair it. Thanks again, Terry
  9. T

    Case 580 B Diesel

    I have a 580-B Diesel w/ power shuttle. In second or third gear it is really lacking in power. In first gear it seems ok. Does anyone have a thoughts on what the problem could be. Thanks, Terry
  10. T

    TDC5

    I have put new glow plugs, voltage regulator, rebuilt starter and generator into machine and got it running. After going for three hours I shut it down but an hour later the wire running from the bat. terminal of the regulator to the ammeter burned up and fried the wiring harness. I...
  11. T

    TDC 5

    I need a parts source to buy glow plugs, a rad cap and many other parts. I am in Ontario Canada but small parts could be shipped up here. Any help will be appreciated.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top