(800) 853-2651
SHOP NOW

Search results

  1. R

    Update on JD Z737

    Thanks for all the replies. I figured I'd start with the easy, changed the fuel filter and plugs. In changing the plugs, I realized a rodent was trying to build a nest . SOB chewed through one plug wire. I ordered 2 new coils and put them in last night, running much better. After the rain stops...
  2. R

    JD Z737 Run 'er til she dies

    I could use a little help troubleshooting my ZTR. I started it on Sunday and it sounded off. I first thought the exhaust manifold gasket was leaking. It seems fine. I then let run a couple minutes like normal before moving/ engaging the PTO. That almost killed the engine. I checked the fuel...
  3. R

    CIH 4240 Hydraulics Problem again

    I posted a few days ago about some problems I was having after changing the fluids. All is well and working but I was about 2 gals. short of full. My nearest CNH dealer is 35 miles away and I can't drive that far. So I called the dealer I had used in the past that services our area once a...
  4. R

    CIH 4240 Hydraulics Problem

    I am having issues with my hydraulic system? I changed the fluids with Hy-tran but am 1 to 2 gallons short of being to the top of the dipstick. At most/least I am at 80%. I cracked the power steering nut like my OP manual says and cranked it over with the fuel stop pulled. I had some fluid come...
  5. R

    Fuel Tank Leak

    I have a problem and need help/options. I have a CIH 4240 open station diesel. My saddle tank has a pin hole, maybe 1/16. I was having issues with rust inside the tank. I replaced the filters a couple times and used a magnet to try and clean out the inside. I removed the tank and the paint...
  6. R

    plumbing question?

    I have a friend who thought it was better to add a second 50 gal. electric hot water heater rather than replace the first 50 gal. with a much larger unit. He read on the web. and plumbed it but can't get them to work together? We get many electrical questions here but I see few about plumbing...
  7. R

    Disc size

    How do you know what the original size of a disc was? I would like to replace my rear sections to as large as what they were?
  8. R

    Finding a value

    I have posted in the past about my cub cadet 2160. I have now decided to sell it but have no idea what to ask? I realize how location and condition make a difference, just want a starting point. Thanks for any input. Jeff
  9. R

    cub cadet 2160

    I posted a message on the garden tractor forum but that doesn"t get as much views. I am looking to sell my cub cadet 2160 and have no idea of a price to put on it? I tried looking at flea bay but the only thing close was a 2165 with snow plow for $900.I think that one will sit for awhile.I would...
  10. R

    Wheel hub dust caps

    Maybe a simple/stupid question but how do you remove the caps without damaging them? I need to put new tires on my splitter therefore I need to get the wheels off. Thanks Jeff
  11. R

    Broadleaf herbicide spray rate question

    I have a partial gallon of Trimec Classic. I got the booklet wet and can no longer read it.In the past, I used a 25 gal. ATV sprayer with a 10 foot boom.I sprayed at a rate of 25 gal/acre but don't remember the oz.of the TC. It is 26% 2-4D and I sprayed the lawn.I would like to mix a 2 gal. spot...
  12. R

    cub cadet 2160

    I have a '96 CC 2160 that I only use for snowblowing. I started having problems starting the tractor two years ago. I have to lay a screwdriver across the solenoid to start?I tried a new one, same result.I am not sure if the third wire from the key is sending power? Can anyone suggest a 12v auto...
  13. R

    RE : concrete mixes

    I just wanted to update people on the mixing project.I moved over here from tool talk because now that it is a working mixer, it is going to be tractor related. Through more internet searching, I found a break-down by weight to mix a one yard, 4000# mix. I adjusted the weights to 5-gal buckets...
  14. R

    RE : concrete mixes

    In reading your answers, I didn't realize the ratio numbers were so specific to materials used.I thought I remembered the 3-2-1.In my younger days I worked for 10+ yrs. in the concrete construction services, poured 1000"s of yards.The largest one day flat work job was 224 yds. All work was...
  15. R

    Larry Stine or other concrete gurus

    I could use a little knowledge from some of you who know. I remember the ratio 3-2-1 and am guessing that is volume , not weight. Is that like a standard 4000# mix ? If so, would 3-2-1.25 be a 5000# mix? My cousin and I are converting an old 50's barrel from hit& miss belt drive to electric motor.
  16. R

    Stihl 029

    Can someone help me with my 20 yr. old stihl 029S farm boss? I lost a part that attaches to the plastic stud atop the fuel tank.I'm guessing it was some kind of breather? Now the fuel spills out when on its side.I can't find a diagram or part # to replace the missing piece.Thanks for the help. Jeff
  17. R

    Ford F250 coolant?

    OT but I do use the truck on our little farm. It's a '05 250 w/ 5.8L gas. I bought used & no manual. My coolant level is low and I'm not sure which type antifreeze it takes? If anybody who has one or knows can help me out, I thank you in advance. Jeff
  18. R

    RE: gun value

    Thanks for all the input. John B.'s site lead me to prices from $687-829 but as was stated, list prices without bids.Due to the fact that it is a special series, 1 of 500, I'm not sure if I'll get the true value? I was hoping there was a site to put the serial # in with the condition & pop out a...
  19. R

    Firearm values

    OT but I've seen gun messages before. I have one rifle I'd like to sell but can't find a site that isn't hidden fee or sign-up friendly? I have a 1 of 500 Rem. 7600 308 camo carbine, in box, never fired. Thanks Jeff
  20. R

    broken axle

    I broke a rear axle on my disc yesterday. I bought it used as a Bush Hog 8 ft unit? There is no name plate on the frame? Is there a way to confirm the make so I can try to find parts and know what size discs belong? I didn't measure it yet, 1" or 1 1/8" square? Thanks Jeff
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top