(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. R

    PTO engagement lever jammed after install

    loosen the pump bolts and try to engage, before you drop the pump.
  2. R

    New to 9n, need help

    https://youtu.be/7lJlhUShbeY
  3. R

    9N rear axle bearing and brake hub disassembly

    Go to utube and watch BundyBearShed video's on Axle and brake hub disassembly.
  4. R

    9N Draft Control ...

    Thanks, I just ordered one from this site.
  5. R

    9N Draft Control ...

    I'm currently replacing the draft control parts on my 9N. Threads on the plunger were frozen, had to cut it out. My question is: The spring plate is worn pretty badly, where the spring and the plate meet. Should I replace it or will it work okay?
  6. R

    9N top lift cover bolts

    Thanks, the bolt for the 9N draft control was frozen on my tractor. I had to cut it out and purchase parts to rebuild. I will definately be using anti-sieze on this bolt, and turning it often, to keep it free. The threads appear to be extra fine.
  7. R

    9N top lift cover bolts

    Thanks Jim! I found a copy I downloaded several years back on my computer. It will be very helpful.
  8. R

    9N top lift cover bolts

    Where can I get this MPC? What does the abbreviation MPC stand for? Thanks
  9. R

    9N top lift cover bolts

    There are 14 bolts in the cover:4-3-5/8", 3-2-1/2", and 7-1-1/2". The reason i'm asking, I ordered a used set and it came with one odd bolt; 1-1/16". I broke one of the 1-1/2" bolts , last time I replaced the cover. If it should have been 1-1/16". that could be the reason. If anyone knows...
  10. R

    ZANE

    My condolences to you and your family. Zane helped me many time over the years, even as recent as August 8th, of this year. I also own one of his inventions, called 'the Zane Thing'. He will be greatly missed.
  11. R

    9N touch control adjustment

    Thanks Scott! I did not remove the fork when I rebuilt the top cover. However, I did notice that the new top cylinder had a different place to hook the spring, than the old; My spring could be weak also. I removed the lift control lever(touch control) yesterday, cleaned it good and installed...
  12. R

    9N touch control adjustment

    Sorry, JMOR. Instead of draft, I meant to say 'touch control'. I tried to adjust it, but adjustment has no effect on when the 3-point arms start dropping. Mine starts dropping at 6-1/2", regardless of the adjustment to the touch control.
  13. R

    9N touch control adjustment

    Jim, the control valve is attached at both sides of the t, and is not upside down. Yes, the T is spring loaded.
  14. R

    9N touch control adjustment

    I recently rebuilt my 9N top cylinder and cleaned the hydraulic pump. Everything works good, but the fork assembly/control valve is sticking, just before entering chamber for pressure. I can take a screwdriver and gently pry on the fork assembly and the control valve engages. Seems to me the...
  15. R

    9N Ford Hydraulics problem..

    Bruce, thanks for the help. If you think of anything else I could try, please let me know. I may have rebuild the pump! The parts looked good when I cleaned it.
  16. R

    9N Ford Hydraulics problem..

    yes, the fluid was calm; non pouring out of the top, like it was before the rebuild. When I pull the inspection plate again. I'm going to loosen the valve caps and pour some oil into each of them. What do you think?
  17. R

    9N Ford Hydraulics problem..

    I replaced the safety valve, cleaned the valve chambers, and connected the wishbone to the control valve. I changed the pto because I wanted the 1-3/8". I drove the tractor around for over 30 minutes today, nothing changed. Won't lift the arms at all.
  18. R

    9N Ford Hydraulics problem..

    I ran and drove it around for over 30 minutes, with no change.
  19. R

    9N Ford Hydraulics problem..

    Yes, the pto is new and turning freely.
  20. R

    9N Ford Hydraulics problem..

    The control valve is new and is moving in and out freely, while moving the touch control arm. I made very sure it was connected properly to the fork assembly.
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top