Looked again. The simulated tag says 82 - 86 the best I can see with a mag glass. & A-1140 R
The metal tag on the slanted pipe with cap on it on the hyd lift says PC 6534, But im positive this has been added on, as it has a hand rather than a foot acvator, and I dont think the hand lift came around till 46, and the holes for the foot lift would have been gone out of the casting. It also came with a JD 3 pt hitch, which also tells me that someone put the lift on it. They wanted to operate a 3 pt off of it.
Tires on both are 38s
A, wheel has 3 holes around 1 1/4dia around 5in from center with a slash cut through from hole to center. B wheel is triangulated in the center, with 9 holes in it, and 6 bolts holding it to the hub. BOTH tractors, the wheels can be removed from the hubs and the hubs left on the axle.
B has nuts holding on brake drums.
The metal tag on the slanted pipe with cap on it on the hyd lift says PC 6534, But im positive this has been added on, as it has a hand rather than a foot acvator, and I dont think the hand lift came around till 46, and the holes for the foot lift would have been gone out of the casting. It also came with a JD 3 pt hitch, which also tells me that someone put the lift on it. They wanted to operate a 3 pt off of it.
Tires on both are 38s
A, wheel has 3 holes around 1 1/4dia around 5in from center with a slash cut through from hole to center. B wheel is triangulated in the center, with 9 holes in it, and 6 bolts holding it to the hub. BOTH tractors, the wheels can be removed from the hubs and the hubs left on the axle.
B has nuts holding on brake drums.