jim buford
Member
This message is a reply to an archived post by JerryMT on August 27, 2013 at 20:54:53.
The original subject was "AcetoneATF Penetrating Oil".
I saw a research study done that showed what various penetrants worked the best based on torque needed to break the bolt free. This was from the Machinist's Workshop Magazine and the results were: no penetrant 516 lb, wd-40 238, pb blaster 214, liquid wrench 127, kano kroil 106 and atf/acetone 53 lbs.
The original subject was "AcetoneATF Penetrating Oil".
I saw a research study done that showed what various penetrants worked the best based on torque needed to break the bolt free. This was from the Machinist's Workshop Magazine and the results were: no penetrant 516 lb, wd-40 238, pb blaster 214, liquid wrench 127, kano kroil 106 and atf/acetone 53 lbs.