Good evening. I'm looking at getting into some light machining. From work years ago I had some experience with JET benchtop mills. There's a bunch (Enco, Grizzly, etc) that are all clones of an older Rong-Fu model. They worked well for us. I cannot justify the space or cost of a Bridgeport mill. I will be buying used.
These mills seem to have two different cast iron bases. On some the cast iron base come up on the mill column shaped like an octagon. On others it is boxy, almost square. Does anyone know if there is a difference? I posted some pictures to show the difference. Both of these are marketed as the JMD-15. I have also heard there is a difference in the diameter of the column, but cannot find this info. Thanks in advance. Dave
These mills seem to have two different cast iron bases. On some the cast iron base come up on the mill column shaped like an octagon. On others it is boxy, almost square. Does anyone know if there is a difference? I posted some pictures to show the difference. Both of these are marketed as the JMD-15. I have also heard there is a difference in the diameter of the column, but cannot find this info. Thanks in advance. Dave