Bench top mill comparison

Dave41A

Member
Good evening. I'm looking at getting into some light machining. From work years ago I had some experience with JET benchtop mills. There's a bunch (Enco, Grizzly, etc) that are all clones of an older Rong-Fu model. They worked well for us. I cannot justify the space or cost of a Bridgeport mill. I will be buying used.

These mills seem to have two different cast iron bases. On some the cast iron base come up on the mill column shaped like an octagon. On others it is boxy, almost square. Does anyone know if there is a difference? I posted some pictures to show the difference. Both of these are marketed as the JMD-15. I have also heard there is a difference in the diameter of the column, but cannot find this info. Thanks in advance. Dave

octagon.png
square.png
 
I can't imagine either one of those would be very rigid, which is important when milling. More so than a lathe.

If you can find a knee mill, you'd be happier.

cover29.jpg

pivot roller780.jpg

This is the modern day clone of the old Clausing 8520. They're available from a number of vendors. https://www.grizzly.com/products/grizzly-8-x-30-1-1-2-hp-vertical-mill-with-power-feed/g0731

I did NOT pay 7K for mine. I bought it back around 2007 for around $1100 new. I don't know how guys afford these things nowadays.

It's a reasonably rigid machine. Not as much as I'd like, but I can usually work around its shortcomings. Smaller cutters, smaller DOC, etc.......... I wish it had a bigger table, more clearance beneath the spindle, and a dovetail head that extends towards the front of the table. But, it's reasonably easy to move, and has a very small footprint.

It took me around 20yrs to finally put a set of decent way covers on it. That's been the only upgrade, besides the coolant tray, that I've done in all the years I've owned it. It's been a trouble free machine.

Despite its diminutive size, it is a "real" milling machine in most respects.

exhaust flange742.JPG

It'll do about everything a big boy will do...........just on a smaller scale. These aren't toys.

winterizing6.jpg

I work in exceptionally tight quarters. So.........although I'd like a full size Bridgeport..........this small machine has worked out well in the confined space available. You do the best you can do with what you have. Budgets, available space, and other things, all force us to make choices.

The one thing that you'll find.......................... YOUR TOOLING WILL COST MANY X THE COST OF THE MACHINE
itsok.gif


Machine tools are the one thing where size really matters. Size means weight, which means rigidity. Buy the heaviest damn thing you can afford, or have room for.

IMHO
 
The biggest issue that the mills you have shown is the spindle design. You know the saying, "A chain is only as strong as the weakest link" If does not matter how rigid the rest of the machine is if the spindle is not rigid. Compare a real mill spindle to the spindles on the ones in your pictures. Depending on what you want to do, they might work for you, BUT be aware the spindles shown in your pictures will not do any real milling.

Spindle comparison.jpg
 
Good evening. I'm looking at getting into some light machining. From work years ago I had some experience with JET benchtop mills. There's a bunch (Enco, Grizzly, etc) that are all clones of an older Rong-Fu model. They worked well for us. I cannot justify the space or cost of a Bridgeport mill. I will be buying used.

These mills seem to have two different cast iron bases. On some the cast iron base come up on the mill column shaped like an octagon. On others it is boxy, almost square. Does anyone know if there is a difference? I posted some pictures to show the difference. Both of these are marketed as the JMD-15. I have also heard there is a difference in the diameter of the column, but cannot find this info. Thanks in advance. Dave

View attachment 169770View attachment 169771
A drill spindle is designed to take axial thrust loads, without much side load. Those drill press mills might be OK for occasional wide tolerance woodworking or maybe for machining light plastics, but I would not use them for metalworking.
 
I had a bench top for years and my biggest complaint was loosing zero when i had to raise the head. I finally broke down and bought a well used Bridgeport clone. What a difference. One of those tools that once you have one you wonder how you ever got by with out it.

OTJ
 
Thanks for all the responses. Two questions remain:

1) What's the difference between the castings in the original photo?
2) What's the difference between a "bridgeport" and a "knee mill" other than the manufacturer? Aren't they the same thing?
 
I have a “foreign” knockoff of the same size. It will do any thing I need it to. So I’m assuming either one of those would work well.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top