Cordless drills

tom-ky

Member
Are any of the cheap cordless drills any good? Got an older 12 volt Dewalt that needs batteries. its over 15 years old. For what batteries cost I can buy a new drill kit but see some others cheaper, one guy said he had good luck out of the cheaper drills.
 
I have 3 older Dewalt's 12 volt. A battery went bad a year ago, bought a new one at a Flee Market for $30. Their still working good.

Dusty
 
I heard one guy say that after the batteries for his became obsolete, he removed the guts from the battery pack and soldered on a long cord. He then used a lawnmower or motorcycle battery. Alligator clips on the cord and hooked the battery up. Said it was handy on jobs like working on a barn roof or something.

Haven't tried it myself but have an old Craftsman that I am saving to try it with.

Gene
 
I heard one guy say that after the batteries for his became obsolete, he removed the guts from the battery pack and soldered on a long cord. He then used a lawnmower or motorcycle battery. Alligator clips on the cord and hooked the battery up. Said it was handy on jobs like working on a barn roof or something.

Haven't tried it myself but have an old Craftsman that I am saving to try it with.

Gene
 
Depends on how you use them, of course (the cheap ones won't stand up to professional use, but of course, neither will many of the ones sold as "professional" models), but many of the cheap drills will hold up surprisingly well under moderate use. A friend bought an 18-V model from one of the traveling tool shows a few years back for $20 and it's took a licking and kept on ticking.
Alternately, if the DeWalt is still in good shape, you could either rebuild the batteries, have some do it for you (many battery stores will do it for less than new batteries and put in higher amp-hour cells to boot) or buy batteries from any one of the dozens of Amazon or E-bay vendors that sell generic batteries (often with higher amp-hour ratings) for less than the name-brand ones. As often happens with batteries, I would guess many of these are made by the same small number of suppliers and just branded (and priced!) differently.
 
I'd suggest it depends on your usage; bought a cheap 'Coleman' 18V from Wal-mart a couple of years ago to drive 1 1/4 screws when 'boxing' my new wood shop; paid about $30 and only bought it because it weighed about half as much as my Dewalt (18V) drills. If you're driving 3 inch screws or drilling large(r) holes, you probably need a name brand drill. Only 1 of the batteries is still good for the Dewalts; bought some sub C batteries on-line just last week......14, enough to rebuild one battery........and disassembled/took apart/re-soldered the oldest battery, which was 7 or 8 years old. Read a lot of forums about doing it; some folks insist there're too hard to solder, etc. It was a 'snap' and the thing works just like new. I bought batteries with tabs, but not next time; too hard to get 'em lined up right. I've ordered another 100 batteries to rebuild the rest of my packs; every drill (5) I've ever owned is still good, but I was down to 2 working batteries. NiMh batteris are stronger, but I went back with NiCd, because that was what was in the originals and I'm not sure my chargers would charge them properly. 2000/2200 mAh batteries can be had for as little as $1.50 each........less than $25.00 to rebuild a battery which will cost almost $100.00 to replace.
 
My batteries are still good but I bought a Dewalt saw at Sears display model for 70 bucks and it came with a new battery.now I have three good batteries.Point is maybe its cheaper to buy a new different Dewalt tool with battery.I see alot of other brands at garage sales with odd batteries that nobodys buying.
 
I BOUGHT A BATTERY FOR MY CRAFTSMAN (18.5V) FOR LESS THAN $30 AT SEARS.
I LIKE THE IDEA OF ADDING JUMPER WIRES,I COULD RUN IT OF PICKUP OR TRACTOR. HOW MUCH CAN YOU DO WITH A 12V?
NEW BATTERY WITH 1/2 DRILL WILL NOT LAST 10 MIN.
 
I did the same thing with our 10+ yr old Craftsman battery packs, and saved a big bunch of $s. My experience was identical - soldering tabbed batteries was a bit aggravating until I got the hang of it, and after about 5 batteries was whizzing thru 'em.

Take your old pack apart and measure the battery size. Ours also turned out to be sub-C size, and you'll either need to know the type (e.g., "sub-C") or the actual dimensions to go shopping online.

I went thru ebay and found many, many of the batteries for sale. Take time to read each ad, because prices do vary some and number of batteries in each package also varies. I got lucky and found a package with exactly the number of batteries we needed (and we have a now-oddball voltage drill, so it has an odd number of battery cells inside).

It was well worth the 2 hrs I spent on it, and the new batteries have worked like champs plus have longer runtimes than the originals.

Go for it!

p.s. - please...don't just pitch old NiCads in the trash. Recycle 'em...Lowes, Radio Shack, other places have battery recycling boxes.
 
On past projects we have passed our drills around useing oneanothers as well as spares.The consensus was always,you are getting what you pay for.The thing most noticable is the ability to "feather" the power while driving screws.Firestorm,ryobi,dewalt,makita ,in that order.I never considered rebuilding bat-paks as some here have done.I will be giving that a try.Who said "you can't teach old dogs new tricks"? Tant so.
 
My Daughter gave me a COLEMAN portable drill to
help make 18 Bluebird houses. I needed to drill
pilot holes and drive deck screws to fasten the
houses togather.
COLEMAN is the most worthless piece of junk i've
ever had, cost her $36, at Menards,. Battery
charge only lasts 10 minutes, Hand tighten chuck
won't hold bits unless you use 2 pair of vise
grips to tighten it. She ment well, but don't
let a women buy your tools. I can' throw it away
cause it'll hurt her feelings, so it will sit on
the shelf forever. I think it's 12 volt..maybe
that jumper cable idea will work ???
 
I bought a light-duty Ryobi 12V just to try it out. It does run out of power on big jobs, but I'm really impressed with the battery charge life and love the light weight compared to my 14.4 DeWalt unit.
 
Agreed. My wife wanted a nice lightweight chainsaw for trimming dead limbs out of junipers and pinyon pines. I realized she wouldn't be able to reach as far as she wanted to go with an extension cord, and a gas unit was out of the question (this is at our vacation home, and I don't want to leave a jug of gas sitting there in the desert for 6 months). I got her the Ryobi 18V set with circ saw, drill, recip saw, hand vac and light, along with the chainsaw. I actually look forward to using that circ saw. It's light, powerful, and lasts a surprising long time on a charge. The drill seems to be a good unit as well. Haven't used the recip saw much. The chainsaw is usable, but nothing to write home about. Chain speed is quite slow, and of course the pinyon pine will dull a chain quicker than any other wood I've cut.
 
Basically you get what you pay for, but remember if you only use them ocasionally the batteries on the good one's will not last much longer than the cheap ones. I have always used Dewalt's in construction, but have found that when the batteries are shot the drill is usually on it's last leg also. Ryobi is a good choice for a more inexpensive tool.
 
I've been using cordless since they first came out. As I recall, Black & Decker had the first with a 1/4" drill, back in the early 70s. After that, I got hooked on Makita for many years with their 9.6 volt line. Then, their stuff got expensive and less reliable. Last Makita kit I bought - both batteries were bad in one year.

I've been using the Ryobi 18 volt "All In One" stuff now for a few years (as sold in Home Depot). All the stuff has been fantastic and cheap when you buy kits on sale. I've got several of the 1/2" drill/screw guns, air compressor, vacuum cleaner (we use in our RV), reciprocating saw, circular saw, flashlights, in-vehicle 12 volt to 18 volt charger, 120 VAC to 18 volt chargers, and scroll saw. Every piece has been excellent, and so have the Ni-Cad batteries. Ryobi also has 18 volt Li-on batteries that fit, but I can't justify the extra expense for something that might now work as well.
I don't believe you'll find a better low-priced cordless anywhere, especially with so many attachments. I just bought an extra kit to leave at a remote property I have. Two batteries, 120 VAC to 18 volt charger, flashlight, circular saw, 1/2" drill/driver, and reciprocating saw - all on sale for $129.
 
I bought a craftmans a couple years back, 18 volt, and its held up as well as any I"ve owned. Bought a couple of real cheap things and they lasted less than a year, primarily because the batteries gave out.

I did solder in a cord and can now run that cheap thing off a motorcycle bat. Very handy for extended drilling when there no electrical service available. Had a fellow tell me he ran a small saw installing counter tops off a motorcycle bat.

Bob
Central Arizona
 
You are right about the Riobi Cordless. I started with the 7.2 volt but the batteries went away after a couple of years and then went to the 12 volt,much better battery life ,but the 18 volt is a whole different animal.
 
Sears has got a deal now on a 19.2 V Craftsman drill and light for $59. I've had mine for better than 7 years and it's really strong. I also use Ryobi 18V, but when the batteries go, I shop for the best deal and this time I hit on a deal for two new 19.2 batteries. Can't beat the tork and usability. The one difference is that my Riobi is 1/2" and my Craftsman is 3/8". You choose.
 
If you have a Batteries Plus store anywhere near, you can have the batteries re-celled, but I don't know what the cost would be. They have been reasonable in the past with their batteries. This past week, Ryobi had a tool sale at their warehouse in Liberty SC. The last time I went, I bought a brand new half inch Ridgid 14.4 battery drill/driver for 58$. They also sold Milwaukee, Ryobi, and some Craftsman drills at similar savings.
 
I have had a pair of Black & Decker 9.6V drills for over 10 years now and have the original batteries. They don't have the punch they did when new but I am not a constant user and I have 3 batteries that I rotate on and off the charger. I have dropped one of the drills from the roof of my 2-story house and it still runs fine even though the case is cracked.

Home Depot has some good deals this weekend for Father's day. Check the website and look at the local sale flyer. I recently bought a 18V Dewalt for the shop I work at and it has amazing torque. It should be good for the $225.00 that we paid for it.
 
I noticed a lot of people like the Ryobi drills. SO DO I! They're absolutely fantastic for the money, have yet to break it. It's just an amazing feeling drill.
 
We had a black and decker a few years ago and it was the biggest piece of crap you could ever buy. Had no torque what so ever and the batteries lasted about 10 minutes. Finally died and we took it back for the two year warranty. Did without one for a while then started to get heavy into the renovations and needed something. I looked around for a while and finally found a 14.4 volt Trademaster for $85. 2 speed,260in.lb. torque, Good battery life and tough. Don't think it's in the states though. I came across another great deal yesterday. Makita 14.4V LXT 3 pc set with duffle bag for $229($200 off) Comes with a drill, impact driver and a flashlight as well as two 3.0 AH Li-ion Batteries and a charger. Duffle bag is as big as a small suitcase. Have yet to really try it but if it's anything like the 18 volt drill and impact it will be great. Really light too. most of the dewalt 18V drills are pretty good. Not too much for consumer grade with the Dewalt 18V. Milwaukee is great but are heavy and expensive. I would say buy a cheap drill but pay attention to the warranty and the specs. Minimum of 1.5 ah 14.4 volt battery and 250 in.lb torque. The Trademaster is really on the border for minimum strength but will drive 3.5" screws with a little difficulty
 
Am I the only one who doesn't use a cordless drill? My wife has one that I'll use if I absolutely have to, for example if I need to work on the mailbox which is 600 feet from the nearest outlet. Otherwise, I'd rather string an extension cord. The cordless drills are slow, bulky and don't seem to last.

I have a twenty-year-old Black & Decker industrial grade drill and a B&D industrial screwgun of similar vintage. Both are going strong. I worked hanging drywall on steel studs with some fellow club members. The other three guys all brought cordless drills. I probably drove 90 percent of the screws with my ancient screwgun.
 
Hace a B&D 24 volt 3/8" drill that I would not take $500 for if I couldn't buy another. More handy than pockets on a shirt.They don't offer 24 volt drills all the time. Lowes only have them on occasion.
 
A lot of the Ryobi tools are junk but they do have a few items that are fantastic. I have their varible speed belt sander and it is awsome. It has the belt centered under the grips and is not real bulky. That said I wouldn't own one of their portable table saws.
 
Look for one that has a top end speed for drilling of about 1100 to 1400 RPM. Also look for one that has a 1/2" chuck.
 
18 volt Rigid drill has worked flawlessly for 3 years now . Great battery life , recharges quickly and they say they will replace the batteries for free when they die .
 
I used a Makita for many years, just bought new battery now and then. I bought the wife a cheap one from Harbor Freight for her hobby stuff. A guy I worked with had one, worked good for him, but Within 3 months, the charger was junk, and I ended up giving it away.
 
GOT A PRETTY NEW RYOBI 1/2" chuck WITH A FLASHLIGHT FOR 68.00 AT HOME DEPOT 18VOLT.. ITS HEAvier than my 12 volt sears,, batts went bad,, but it will sure walk the dog ....i like that flashlight too..
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top