Finally got to tinker around with the 951 I picked up a few months back. I mounted the 711 loader I had on my previous 961 and it works fine with the exception it drifts down slowly when the remote valve goes to it's neutral position. It held solid on the 961 so I assume it's a remote issue. Any adjustments that can be made on it? I also want to remove the short line and go directly into the remote. Can I just loosen the bolt on the top of the valve and spin the fitting to face forward? Or am I just asking for trouble with a gasket or washer on there that has probably been in place for 60 years or so?