Tall T
Well-known Member
My bottles are empty but with flex bar, pipe wrench and pipe extension, I got the top bolt out COLD — couldn't even pound it out. This time I did soak with MP over two days.
Wasn't sure if the brace angles would prohibit this move, but i moved the front braces to the outside so the stepped pins now work on the inside.
The original spacer will go back between the rear braces and I just need two more spacers one on each side of that.
It could be that whenever new ball ends were put onto my lower link arms, that the arms got a bit shortened, so if I ever have to replace the ends I'll make the arms a little longer.
Terry
Wasn't sure if the brace angles would prohibit this move, but i moved the front braces to the outside so the stepped pins now work on the inside.
The original spacer will go back between the rear braces and I just need two more spacers one on each side of that.
It could be that whenever new ball ends were put onto my lower link arms, that the arms got a bit shortened, so if I ever have to replace the ends I'll make the arms a little longer.
Terry