Dearborn 10 156 Plow

[Robert, NC]

Trying to find what the initial setting would be on a 10 156 14-inch plow for the draw bar. Standing behind the plow looking forward on the right side the drawbar had a L shaped drop. What would the distance be from the L back to the frame
Thanks
Robert

 

[Leroy]

If you can find a manual for it that setting should be covered on it. But ALL Dearborm - Ferguson 3 point hitch from that time frame call for a 52 inch wheel tread, that is center to center of tire.

 

[plowman]

I have manuals for those plows. Thanks Steve 419-618-0017

 

[Robert, NC]

I have the manuals but it doesn't give the initial setup distance.

I have attached a photo of the plow and the red line points to the measurement I am looking for
Thanks

 

[Leroy]

I know on the older plows it does give that and it is a round bar that you twist to change the angle of pull it does not get moved in or out. I would say there has to be adjustment holes or only one hole where it has to stay put.