Farmtrac 60 Ford 5000 front end loader?

[hamilcrf]

I was responding to an old post so please be informed it my not seem correct. The old post was about loader on a 5000.This message is a reply to an archived post by Destroked 450 on October 06, 2020 at 17:00:26.
The original subject was Re: Ford 5000 front end loader?.

destroked450 or anyone. I
have a farm trac 60 and
have a model 727 loader my
tractor has 2 remote valved
under the seat on top of
transmission plate. I want
to use a mast mounted
single lever dual action
control valve. Joy stick
type. Were do I connect the
preasure hose? The return
hose? I belive I may need
an adapter plate HV4902.
Will this work on my
tractor installing between
the 2 spool valves on top
of the transmission? The
reason I ask is because of
the 2 factory mounted spool
valves and that my tractor
is not a Ford 4000 it's the
farmtrac 60. I don't want
to order the valve and find
it won't work. Also
destroked450 were did you
purchase your remote pump?
Will it fit my farmtrac 60?
A link to the kit would be
awsome. If I could talk to
someone about all this that
be great I can email you my
#. Thanks in advance for
any help.
<img
src=https://www.yesterdaystractors.com/cvphotos/cvphoto16008
3.png>

 

[Destroked 450]

Prettier sure the Farmtrac 60 copied the Ford 3600/4600 3 point lift top but a photo of yours would help
I ve plumbed a couple of HV4902 adapters but like the HV5209s ORB fittings better, it cost a little more but the fittings come with the adapter
I barely remember the thread and am unsure what remote pump your talking about, my Farmtrac 555 hyd pump is the same as one used on a Ford 3600/3610

 

[hamilcrf]

Thanks destroked for the
reply here is a link to
original thread.
https://www.yesterdaystract
ors.com/cgi-bin/viewit.cgi?
bd=ford&th=692831
The picture of your pump is
in the thread. Did that
pump come stock on your
farmtrac? Do you know if it
would fit my farmtrac 60?
Is it flywheel driven or by
a gear can't tell by the
picture. Hopefully I can
get the answer at some
point. I am in Colorado
till labor day. I have a
ford 5000 here and the
farmtrac is in Texas. The
loader came off my 5000 and
I brought the FEL to texas
for my girlfriends farmtrac
60.I have an old ferguson
with a FEL so I didn't need
it. The 5000 I use to groom
a motocross trac pulling a
disk. The FEL went on her
tractor easy enough just
had to modify the front
bracket. We need it to
stack round bales so I
don't mind if its slow.so
the valve adapter is my
best option cost wise. She
buys hay for winter.you
know a pony girl. I like
the farm and getting out of
Colorado for the winter. I
will post a picture of the
top plate valves when I get
back to Texas.

 

[hamilcrf]

The link I copy and pasted it got cut off. Here it is again and this time I put it in the url box. Not real good with the forum layout. I'll get it eventually.
https://www.yesterdaystractors.com/cgi-bin/viewit.cgi?bd=ford&th=692831
Original thread with farmtrac pump picture

 

[hamilcrf]

The link to original thread
Link