Help

[Moose]

We just re-built a 40 with a little extra for pulling. I need a new carburetor but I need one that will handle approximately 35 horsepower. Do I need to stick with the TSX530 or go with a new zenith? Or is there another updraft carb that would work better? Thanks in advance.

 

[Mike M]

Yours should have an adjustable main jet and you should be able to get enough to over fuel it ?

Or if you don't have one at all ? get one for a 440 crawler. Get the starter too, but check that it is the 4 pole type.

 

[Moose]

Thanks for the reply. The carb I have is shot so I need a new one. I thought that the carb for the 440 had a different bolt pattern?

 

[Mike M]

Well now you got me to wondering ? I guess I can't say for absolute sure they are they same pattern ? I kinda thought they were similar size only because there only really seems to be two rebuild kits needed, one for the smaller carb. on the L and LA models and one for all the others.
I guess a tape measure will be needed when searching.