IH 674

[K95150]

Hi, just picked up a 1976 IH 674 Diesel, europe model according to serial # It's great, question I have is on the lift levers. Sitting in the seat, the outside lever raises and lowers the arms, I have a brush hog on it now. The lever next to it doesn't do anything? From what I've read its supposed to stop the arms at which point you want? to control the height of he brush hog or other implements? any help or suggestions greatly appreciated, or if somethings wrong how to fix.
Thank you
-G

 

[RedMVa]

Inside lever should be raising and lowering, outside lever is the draft control, light all the way up and heavy all the way down

 

[Powered By IH]

Hi, just picked up a 1976 IH 674 Diesel, europe model according to serial # It's great, question I have is on the lift levers. Sitting in the seat, the outside lever raises and lowers the arms, I have a brush hog on it now. The lever next to it doesn't do anything? From what I've read its supposed to stop the arms at which point you want? to control the height of he brush hog or other implements? any help or suggestions greatly appreciated, or if somethings wrong how to fix.
Thank you
-G

Put the draft control lever all the way up or all the way down, and then move the position control lever and see if that makes a difference. Can't remember which way the draft control lever has to be for the position control to work correctly, but it has to be all the way up or all the way down.

At least try that first...

 

[K95150]

Put the draft control lever all the way up or all the way down, and then move the position control lever and see if that makes a difference. Can't remember which way the draft control lever has to be for the position control to work correctly, but it has to be all the way up or all the way down.

At least try that first...

Not to sound dumb, lol but which one is supposed to be the draft control? Inside or outside lever?
Thanks
-G

 

[RedMVa]

Not to sound dumb, lol but which one is supposed to be the draft control? Inside or outside lever?
Thanks
-G

Post #2