DLH_Woodstock
Member
Hey Guys
My 435 started having problems today with the three point. Using a 4 foot tiller today the 3 Point started jumping or bouncing up and down. At one point it was stuck in the up position. I removed the leakage from the selector and got it back down. We then used it for about 20 minutes. After that it started bouncing again and broke the load control arm. (I believe that's what the arm is called. It comes from the back and connects to the linkage that attaches to the selector.) Oil level is correct and I changed the oil last year with 20W non-detergent Valvoline. Could not find 10W. Anyway I have repaired the arm by welding grinding and re-drilling the hole for the pivot ball. That fixes the arm but not the cause of the problem.
Has anyone had the problem or got any thoughts?
Thanks
My 435 started having problems today with the three point. Using a 4 foot tiller today the 3 Point started jumping or bouncing up and down. At one point it was stuck in the up position. I removed the leakage from the selector and got it back down. We then used it for about 20 minutes. After that it started bouncing again and broke the load control arm. (I believe that's what the arm is called. It comes from the back and connects to the linkage that attaches to the selector.) Oil level is correct and I changed the oil last year with 20W non-detergent Valvoline. Could not find 10W. Anyway I have repaired the arm by welding grinding and re-drilling the hole for the pivot ball. That fixes the arm but not the cause of the problem.
Has anyone had the problem or got any thoughts?
Thanks