john deere 3130 coolant heater replacement process

tips on replacing a coolant heater on a john deere 3130 with a cab heater
This or that ?
The immersion heaters are from the Phillips and Temro Catalog
3130 appears to have the 1-5/8 port
Along the upper left side of the block.
There is also a 1” pipe thread plug on the upper rear of the block , left side . No idea if there is room to wiggle an immersion heater in there or not ? Anywhere from 400W to 1500W may fit
?
 

Attachments

  • IMG_2770.jpeg
    IMG_2770.jpeg
    116.4 KB · Views: 0
  • IMG_2771.jpeg
    IMG_2771.jpeg
    165.7 KB · Views: 0
  • IMG_2786.jpeg
    IMG_2786.jpeg
    260.5 KB · Views: 0
  • IMG_2787.jpeg
    IMG_2787.jpeg
    108.8 KB · Views: 0
  • IMG_2774.jpeg
    IMG_2774.jpeg
    92.2 KB · Views: 0
Last edited:
Upvote 0
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top