light weight frt. end

[showdown]

HI. can this be made for a 77 oliver? Thanks

 

[Anonymous-0]

Wide or narrow ?

 

[showdown]

I saw one someone had made for farmall m, and didnt known if he could make one for a 77, narrow. I also thought about a wide but it would have to be light, cus iam trying to get into 3500 class Thanks.

 

[TimYates]

Use the 66 lighter front end for a bolt on. Or cvustom build one with trailer hubs.

 

[6pack]

(quoted from post at 10:13:26 08/12/12) I saw one someone had made for farmall m, and didnt known if he could make one for a 77, narrow. I also thought about a wide but it would have to be light, cus iam trying to get into 3500 class Thanks.

NO Farmall is a diff. animal, Is this a 77 or Super 77? A 66 narrow front is a direct bolt in, but a massey 22 or 81 is even lighter (requires some work to steering shaft and mounting to tub) and a 5 bolt hub so it is easy to put aluminum wheels on it..remove the pto, belt pulley, hydraulics, lighter seat and mount, lighter adjustable hitch, lightened pressed steel wheels.....all of this is easy to do and still be able to put back to original....to cut more weight you can cut the axles down use weld on hubs, cut the fender brackets off, fab an aluminum top cover, make aluminum side panels, aluminum 3 gal. fuel tank....


What are you doing for a motor?

 

[showdown]

Is this massey harris pedistil hard to find, how much work to install it on the 54 77rc, and how much more weight would I save,is it worth it. its not a super Thanks........

 

[baldwin racing]

I have another atv chassis to build this fall....(going from one extreme to another) lol, then i will be doing some front ends for guys I would just need to get all the measurements from you.....I have couple friends in nj i could probly get measurements from if needed.

I will be able to make round or square tube ones.....round tubes just take alittle longer but is not a problem....
kelly

I will let everyone know when i am done with the atv drag chassis.....

 

[showdown]

HI DO YOU KNOW HOW MUCH HAS TO BE DONE TO MAKE M.H. 22 OR 81 FRT. END FIT A OLIVER 77RC. THANKS