I've got a customer who has a 931B with the dry steering clutches. The yoke that releases the clutch has a ball on one end that rides in a hole in the steering clutch housing. Common sense would dictate that there be a wear part in that hole, and from what I can see, and have been told, there is.
Now the problem. I ordered parts for this thing awhile back and had told the parts guy I needed those parts. What showed up was two bronze bushings that don't even fit the holes.
I called back and the parts guy this go round doesn't seem to be able to find the piece anywhere. I dug through my parts books, and found both one for a 931B and an old D3B which shared a lot of the same parts. I have looked at every page, in both books, and haven't been able to find it shown anywhere either.
Dad says he's sure he has changed them in the past, but doesn't remember anything in regard to part numbers, or where they found them.
Does anyone have any idea where I can find a part number for the piece I'm looking for, or better yet, does anyone know what the part number is?
Thanks for any help ya'll can offer.
Now the problem. I ordered parts for this thing awhile back and had told the parts guy I needed those parts. What showed up was two bronze bushings that don't even fit the holes.
I called back and the parts guy this go round doesn't seem to be able to find the piece anywhere. I dug through my parts books, and found both one for a 931B and an old D3B which shared a lot of the same parts. I have looked at every page, in both books, and haven't been able to find it shown anywhere either.
Dad says he's sure he has changed them in the past, but doesn't remember anything in regard to part numbers, or where they found them.
Does anyone have any idea where I can find a part number for the piece I'm looking for, or better yet, does anyone know what the part number is?
Thanks for any help ya'll can offer.