homer long
Member
I installed a complete new clutch assembly new pilot bearing and release bearing with carrier on my 35.The gap on secondary pressure plate came sit at .075 was told by 2 dealers put in with these settings got tractor back together and adjusted pedal free play at 3/8. Started her up PTO grinds will not engage so start regap and set at .090 same thing pto grinds adjust pedal a little no engagement at all tractor will not move adjust again counter clock wise now tractor moves pto grinds made more gap changes to .060 No Good now changed to .110 No Good Back to pedal lets say all the CC is 12 oclock can only turn clock wise to about 3 minutes pass 12 and clutch NO engagement tractor no movement I don,t what to do next Do I need to split again and check or set fingers Clutch came from AG parts in Iowa Thanks