ditchwitch
Well-known Member
I have a 80 x 250 garden. I am trying to rig up some kind of irrigation system. For my water source i have a well right at the garden. I tried 1/2 in PVC pipe 250 foot long and drilled 2 really small holes just off center of top like at 11 and 1 o'clock hoping the water would spray or mist 2 or 3 rows each side of the pipe. Problem was i didnt have enough pressure for the 250 foot so i cut the pipe in half down to 125 foot. I actually have plenty of water just not enough pressure. Would it be possible to put a pressure washer inline to increse my pressure and fix my problem.
Im not looking for something big and costly. And im not trying to water the whole 80 x 250 at one time. If i could mist 2 or 3 rows each side of the pipe would be great. I know with all the knowledge of yall folks on here this could be a easy fix .
Thanks for your imput in advance.
Im not looking for something big and costly. And im not trying to water the whole 80 x 250 at one time. If i could mist 2 or 3 rows each side of the pipe would be great. I know with all the knowledge of yall folks on here this could be a easy fix .
Thanks for your imput in advance.