Hey guys,
Thanks for the help. Got an old Massey
Pony, new plugs, wires, condenser,
points, etc. New battery and wiring
harness.
Tried to start it - sounds like it's
trying but not quite 'making it'
Some small greyish smoke out of the
stack. Pushing sharp puffs of air out
of the intake manifold for some reason
- about a puff every 1.5 seconds or so.
Gas dripping out of the bottom of the
carb.
If I didn't know any better I'd say it
was running backwards?
I have it set up now as a positive
ground. 6v system.
Possible stuck valve? Unsure what move
I should make - don't really want to
start taking off the valve cover and
head if I don't have to. Compression
(thumb test) seems to be good.
Thanks for the help. Got an old Massey
Pony, new plugs, wires, condenser,
points, etc. New battery and wiring
harness.
Tried to start it - sounds like it's
trying but not quite 'making it'
Some small greyish smoke out of the
stack. Pushing sharp puffs of air out
of the intake manifold for some reason
- about a puff every 1.5 seconds or so.
Gas dripping out of the bottom of the
carb.
If I didn't know any better I'd say it
was running backwards?
I have it set up now as a positive
ground. 6v system.
Possible stuck valve? Unsure what move
I should make - don't really want to
start taking off the valve cover and
head if I don't have to. Compression
(thumb test) seems to be good.