Minneapolis Moline valve adj.

[Anonymous-0]

how do you adjust valves on a moline U302 4cyl. can you adjust 2 sets of valves at once. any info would be appreciated. thanks

 

[evilboweivel]

ask down on the MM board
good luck
MM

 

[com- yellow]

stephane , turn the motor over slowly until the second valve from the front is closing or coming up , this will bring #1 to compresion stroke at the same time look at #4 cyl or the last 2 rockers at the point one stops and the other starts to move you will be at TDC #1 NOW turn the motor 1/2 turn and adjust #3 again 1/2 turn adjust 4 and then 1/2 turn for #2.. Bob

 

[stephane]

thanks alot for the help. i will give it a try tomorrow.