moline U engine question

[Anonymous-0]

I have just bought a moline U. I am wanting to put in the six inch crank but keep the stock U blocks. Is anyone making pistons for this combination? Can I use the stock rods? Is there anything else I will need to do?

 

[Agco Avenger]

Wendell Everett has the pistons you need. You can use U rods but will have to grind the crank journals down to fit. 6" crank is 2.75" 5" crank is 2.57"

 

[Jim F.]

Maybe you could offset grind the crank to the U journal size you have listed for even a little more stroke???

 

[Mopower]

Wendell Everett will hook you up. You need M5 blocks, G crank, U rods, and Wendell's pistons. Offset grind the crank. Bore and stroke is 4.81x6.1875. 449 cubes. Other parts help likes heads, Carb venturi, LP manifolds, etc.