Britcheflee
Well-known Member
I could hear a puffing sound coming from the area where the manifold attaches to the muffler on my Mercury - at first I thought it was the gasket but on closer inspection discovered a small hole on the flange - decided to give this a go;
http://www.amazon.com/Blue-Magic-18003-QuikSteel-Temperature/dp/B0084AA2LK
Cleaned up the area, mixed the stuff up and using an icecream stick started putting the stuff on - first pushing it into the hole then putting a couple of layers on at a time - left it overnight and started the car this morning - rock solid. Not often you get a product that actually works well and thought I would pass this on - should easily repair small cracks/holes in tractor application on manifold, muffler etc.
Lee
http://www.amazon.com/Blue-Magic-18003-QuikSteel-Temperature/dp/B0084AA2LK
Cleaned up the area, mixed the stuff up and using an icecream stick started putting the stuff on - first pushing it into the hole then putting a couple of layers on at a time - left it overnight and started the car this morning - rock solid. Not often you get a product that actually works well and thought I would pass this on - should easily repair small cracks/holes in tractor application on manifold, muffler etc.
Lee