steve19438
Well-known Member
"Pull your filler plug for the transmission look inside you will see a big gear.
Find a level spot shut off the tractor. Push the clutch down & put the high low shifter in neutral to relieve any pressure that might be on the gears.
With a long screwdriver or a small pry bar pry the big gear forward if it is hung in reverse. Pry it back if it is hung in first gear. If you happen to go to far it will go in the other gear. You need to get it in the center.
You should be able to feel the detent balls pop in the grooves in the shift rail as you move the gear.
found this on another forum. do I need to keep the clutch depressed as I do this?
Find a level spot shut off the tractor. Push the clutch down & put the high low shifter in neutral to relieve any pressure that might be on the gears.
With a long screwdriver or a small pry bar pry the big gear forward if it is hung in reverse. Pry it back if it is hung in first gear. If you happen to go to far it will go in the other gear. You need to get it in the center.
You should be able to feel the detent balls pop in the grooves in the shift rail as you move the gear.
found this on another forum. do I need to keep the clutch depressed as I do this?