AndrewFromNS
Member
Evening Folks,
When I bought my Super-C from TractorSam, he warned me that before I wanted to do any plowing, I'd need to fix the two components of the Super-C's Fast Hitch Draft Link. Well, after doing a bit of damage to the hitch horseshoe that required the use of the blue wrench, Sam straightened up the lower half of the draft link (part 4 in the following diagram)...he had jury-rigged a link to work so he could plow his garden before selling me the tractor, but I would rather like to get the proper device in there, even if it hardly sees use.
So, here's the diagram from Case/IH:
Case-IH Hitch Diagram
What Sam fixed is #4, what I need info on is #1, the rod that goes from the lower link to the upper rockshaft. I understand its a rod with a series of holes. If someone could provide a picture, as well as the spacing of the holes, distance from the top, diameter of the holes, length of the rod, etc, it would be VERY much appreciated.
Thanks in advance, everyone!
Andrew Reid
When I bought my Super-C from TractorSam, he warned me that before I wanted to do any plowing, I'd need to fix the two components of the Super-C's Fast Hitch Draft Link. Well, after doing a bit of damage to the hitch horseshoe that required the use of the blue wrench, Sam straightened up the lower half of the draft link (part 4 in the following diagram)...he had jury-rigged a link to work so he could plow his garden before selling me the tractor, but I would rather like to get the proper device in there, even if it hardly sees use.
So, here's the diagram from Case/IH:
Case-IH Hitch Diagram
What Sam fixed is #4, what I need info on is #1, the rod that goes from the lower link to the upper rockshaft. I understand its a rod with a series of holes. If someone could provide a picture, as well as the spacing of the holes, distance from the top, diameter of the holes, length of the rod, etc, it would be VERY much appreciated.
Thanks in advance, everyone!
Andrew Reid