Wagner Loader Pump

[Anonymous-0]

I've finally got the loader mounted on my 600 and tried it. First thing I found was the loader only went up no matter which way I moved the lever and the bucket tilt did nothing.I took the valve apart and the plug on the up/down side was missing the spring for the ball.The tilt side was missing the ball. I found some parts I think will work. The next problem was the pump seal leaking bad. I pulled it apart and after taking it to a bunch of hydro stores in Memphis they all said good luck. There has to be some way to make a seal, and shaft bushing for tthe pump.It's a Hydreco and it has 2X15X19C on it.The pump worked perfect but just leaked. Any of you had any luck with something like this? Thanks.

 

[Douglas Lloyd]

Hey Danny,

I can't help on the pump problem - sorry.

I am putting a Wagner FEL on a 600 but will have to make my own brackets for the rear axle. Would be interested in a photo or two and some measurements.

Doug in east TN

 

[Anonymous-0]

I don't have a way to send you any pictures but the loader frqme should already have what you need on it. Basicly at the back it is a piece on angle iron that sets on top of the rear axle and bolts under the fender using the same holes and bolts.

 

[Douglas Lloyd]

Thanks Danny - pm sent