(800) 853-2651
SHOP NOW

Search results

  1. R

    Wd 45 mounted corn picker.

    You'd have to crawl under it and examine the attach points. You already have a WC so you know that tractor pretty well. As far as the drives, the WC and WD/WD45 pulley and pto are in the same place so that shouldn't be a problem. You wouldn't have a live pto with the WC but we ran a New Idea...
  2. R

    Wd 45 mounted corn picker.

    You should be able to tell if the transmission shift lever was bent by someone or if it has the factory made curve. If it's a straight shift lever that has been bent, then it's a WD. Not a WD45.
  3. R

    JD 620 transmission to powershaft seal

  4. R

    Former politician and lawyer. No first hand knowledge of farming whatsoever but am willing to learn.

    Former politician and lawyer. No first hand knowledge of farming whatsoever but am willing to learn.
  5. M

    thinking about buying a D17

    looking at a D17 gas wide front whats the good and bad what do i look for? thanks up front for the help
  6. B

    hydraulic drain

    where do I find the rear drain for hydraulic fluid in Ford 8N? Under the differential there's a part of the casting that looks like a 6 inch long 3/4" pipe with a pipe plug. I was told that it wasn't the drain. I don't see any other plug in the region. Thanks ahead for your comment
  7. J

    535 baler

    Has any one had the rubber on the drive rollers on a 535 rebuilt and if so where and does it last.
  8. R

    John deere unstyled A clutch without snap

    I have a unstyled A that does not have the snap to the clutch when you throw the lever forward. The clutch disk measure at .150" and is correct according to spec. The clutch will not adjust up enough to move the tractor.... I am trying to get it parade ready, it starts and sounds great. Thanks...
  9. F

    Question about Cases

    I am not a Case guy so i was wondering if anybody here would have a good idea. I own a Case two bottom rollover plow that is a Eagle Hitch hookup. I believe its a model T1. It hydraulically controled to roll over, has one tailwheel tire that is hinged so it is used in both furrows. We have...
  10. T

    massey 135/2135 rear axles

    Hi all, Got my massey 135 running good and bought a parts machine that had diffy lock but had very short axles. Was wondering what they were used for? I would like to swap them for a set of normal length axles with diffy lock or sell them and apply it to buying a set. Any ideas of who would use...
  11. K

    8N Headlights

    Just brought home 1950 8N front mount ,I was handed a box of bits which included the headlight rims and the sealed beams nothing else in the box Q, How are the sealed beams secured in the lamp holder don't have a picture so can't figure it out.Thanks Ken.
  12. 8

    farmall h all fuel shutoff

    I need a fuel shutoff and or a packing sleeve for the shaft on the sediment bowl under the gas tank on all fuel tractor.
  13. D

    My air comperssor tank split.

    Fired up my compressor yesterday to air up some tires. It got to pressure and auto shut off, but I heard a hissing. On the bottom, near the tank drain was a 3" long slit. It was only 21 years old(grin). The old one is (was?) a 5hp, 230v, 80 gal upright that produced 12 cfm @ 90psi. Any...
  14. S

    angle iron = ford bandaid :)

    was discussing a few things on another forum with a guy I know.. came to talk about fixing parts that were bent or broke and them being weaker once straightened..e tc vs scabbing on some metal to bring the strength back up. Thinking back to all the steering draglink tues I've seen with angle on...
  15. A

    2090 Air conditioning

    I pulled the top cover off the cab to do some cleaning.(Was not getting much air flow out of the AC vents)There is no duct work from the blower motors to the evaporator and heater core.Am I missing parts? Does the open area in the top of the cab act as the duct work ??
  16. L

    Rear wheel rims

    Does anyone know if new 11 x 38" rear rims are available for the 2 cyl John Deere tractors. I've been told by a number of "suppliers" of new and used rims that 11x38 are not currently manufactured. Additionally, I've located a used 11" rim that has welded "locator keys" or antispin "bumps" on...
  17. C

    4000 4cyl. Diesel injection pump leak

    I have a Ford 4000 diesel injector pump leak at the bottom small allen screw on the right side of pump shown in the picture. The screw that hold the oval cap. Is this an adjustment screw? Can this be tightened or removed without changing adjustments? Any idea of how to stop drip leak? In...
  18. J

    Central IL Pulling

    Go to be in central Il this weekend, wondering if there was any antique pulling happening. Thanks for any response.
  19. O

    Tested the BA yesterday got it named right LOL

    Well I tried the use the BA to cut some hay yesterday. Well as I said I named it right it has a bad attitude and didn't make it one single round before it started to give me problems. Has carb problems and will sit and run well if you just let it sit but try to make it work it wants to stall out...
  20. J

    Hydraulic cylinder part numbers-location?

    I took the dipper cylinder off an old 580CK backhoe Model 33 and could not find a part number stamped on it. I disassembled the 4-1/2 in. cyl. to compare the seals, etc with my parts manual. There were a couple different cylinder part numbers used on the 33. The gland was in pretty rough shape...
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top