Recent content by bobmiller36

  1. B

    3010

    I have a 63 3010 that I want to move the frontend on. My dealer told me to remove the axel bolts and drive it around very carefully and it would break loose. Long story short I"ve been driving it around without the bolts in for two years, still won"t budge. any suggestions will be...
  2. B

    3010

    I have a 63 3010 that I want to move the frontend on. My dealer told me to remove the axel bolts and drie it around very carefully and it would break loose. Long story I"ve been driving it around without the bolts in for two years, still won"t budge. any suggestions will be apprecaited.Thanks in...
  3. B

    3010

    I ve had a 3010 gas for about twenty years. I only run alittle over a hundred acres ,but the 10 did all my heavy work for many years and still cuts,rakes and bales all the hay plus blows snow, pulls a 6 row planter,ect.ect. I would buy one in a minute. a very reliable tractor for the money. Bob
  4. B

    #1 spark plug wire

    I know it does on a mag,and 95%sure on a disb. as well. Bob
  5. B

    3010

    My question is ,is there anyway other than the fuelpump that gas can get into the crankcase. Its not much maybe a fourth or half a qt between oil changes which are spring and fall,and its used alot. Iknow it is not water,(not any in oil during changes) Like I said in a previous post shes getting...
  6. B

    JD 4020 Plows

    I live in south central minn, (heavy black gumbo)pull jd 2600 4 18's third gear ,no problem fourth gear and the low areas test the power but he pulls it. I would go with the 4 bottom. bob
  7. B

    3010

    I"m thinking about rebuilding my 3010 gas(shes getting pretty tired) I was looking at inframe kits, which kit would you guy recomend the tisco or a kit from john deere. thanks in advance for your help. bob
  8. B

    need help on 49 A !!!!!

    If everything checks out the plug wires on the mag may be backwards justy switch them around its a good place to start. Bob
  9. B

    JD-A hardly runs

    RON Put a condenser in it. good luck Bob
  10. B

    4020

    I just had to overhaul my twenty because of a scored piston.The dealer who did the overhaul did a good job my problem stems from their driver who hauled it. It was cold when they hauled it home it was around zero, they used either to stert it and then left it run on the trailor for 40miles to my...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top