Recent content by Bubba Prosser

  1. B

    MF 230

    Well I'm giving up for the rest of the year. I'm going to need to get the injector pump rebuilt or find another one. It sat for 10 years and gummed up but ran good before. I got a kit and took it apart cleaned it good and everything was moving freely. I got it back on and bleed but can't get...
  2. B

    Model J Disc

    I've got a Model J ford disc 7 1/2' that needs all of the blades replaced. Does it have any value worth trying to sell or load it on my scrape pile? Thanks for your advise.
  3. B

    MF 230 Injector Pump

    Friends I need help. I rebuilt the engine about 10 years ago and it just sat. When trying to bleed the injector pump I couldn't get fuel to the injectors. The advance piston was all stuck. Here's my problem. When I took out the parts in the end cap with the filter I'm thinking some things were...
  4. B

    BX23S

    Well after doing some research I bit the bullet and bought me a brand new one! First new thing I've ever bought. There's a dealer about 10 miles from me and 2 more within 30 miles that was a big deciding factor. I have to say that little machine is a beast! I've only put 43 hours on it but I'm...
  5. B

    3000 Straight Wire

    Morning friends. Now that it's cooling off I'm getting some projects done. I bought a 1971 3000 Ford gas and the water pump is bad and that's supposed to be all but it's sat for a long time. I'm going to pull the tin off and remove the water pump. I want to see if it in fact will run before I...
  6. B

    Throttle Up Problems

    Thanks!
  7. B

    Throttle Up Problems

    Good afternoon. I've got a 640 with a Jubilee engine I only use to cut around my pond and ditch bank with a sickle mower. I use it 3 or 4 times a year. It idles good but when I give it throttle it hesitates and stumbles bad until it seems to catch on then it runs pretty good until you throttle...
  8. B

    MF 230

    Does anybody have a diagram or can draw me one showing all of the diesel fuel and injector lines and where they all hook up? Mine is the single filter one. I took it a part about 10 years ago and rebuilt the engine and have just now been able to start putting it back together. I have the manual...
  9. B

    Electrical Nightmare

    I'll have to look tomorrow and see.
  10. B

    Electrical Nightmare

    Hey friends I picked up a 1970 Ford 3000 gas and the wires are everywhere and no where! I'm going to just redo it. It's been rigged with an alternator. Does anybody have a wiring diagram showing me how to rewire it correctly? It has alot more electrical stuff than my 65 diesel. Any help would be...
  11. B

    Ford Flail Mower

    Thanks I'll try.
  12. B

    Ford Flail Mower

    1/4" is to small and 1/8" is to big. I looked for a 5/16" but can't find one.
  13. B

    Ford Flail Mower

    Morning friends. I bought a pretty nice looking 1971 gas 3000 that supposedly only needs a water pump. It's been setting for years. It came with a Ford model 917 22-184 mower. I only paid $300 for it and going to try and get it going. I'm trying to get the mower going first to use. I've got...
  14. B

    New Tractor

    Morning my friends. I've almost got my house paid for and I always said I would buy me a new tractor when I did. I've got several tractors right now that I use mainly a 3000 Ford diesel. I've got a MF 230 that I've rebuilt the motor on and have to put back together. I bought a 3000 Ford gas in...
  15. B

    Wiring Help

    Thanks!
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top