Recent content by Jasper1675

  1. J

    Time Before my 8N

    2 seater, I think the second guy sits on the back and runs the weed eater.
  2. J

    Deaborn loader question

    Thanks guys, Found what I needed. The manuals will help.
  3. J

    Deaborn loader question

    I have a deaborn pipe loader, but the cylinders leak pretty bad. Is there anywhere that has information on these loaders so I can see about rebuilding the cylinders or maybe replacing them. I have googled deaborn pipe loader several times get almost nothing.
  4. J

    Backhoe?

    Was there really a backhoe for the 9n. I have a 9n from the transmission back. I was thinking a back hoe would be nice for irrigation ditches, saw this on my local craigslist today. the add made it seem like it covered allot of machines. Anyone used one of these...
  5. J

    Oil poured from hole w/cotter key when parked downhill.

    Have the same issue was asking the mechanics at the local tractor shop, everyone of them agreed I had a bad front seal. Also they knew I wasn't bringing it to them to be fixed, since I told them I had to fix it myself. They all said you have to split the tractor and replace the seal, all...
  6. J

    ford 8n

    I purchased a N with a loader on it off of craigslist for 1200 bucks with some other attachments. Personaly i love it don't regret it at all. Now that said I had a little over a 1000 to 1500 for the tractor budget, I only have a 3 acre flat pasture. Everytime I drive by the tractor dealer I...
  7. J

    Question for bruce tip 48

    brian that is what i was looking for, will come in real handy. That way i can setup on a spot for the loader and set the parking break
  8. J

    Question for bruce tip 48

    I will go look for this little lever. Can i activate while sitting in the seat or is it out of reach.
  9. J

    Question for bruce tip 48

    Bruce, I'm unsure if you wrote the 50 tips but you quote them allot so thinking you might have. My question ahs to do with tip 48. I agree i need one of these you got any pictures or is there a kit. One would be really nice to have for the front end loader, we are going to modify it to have...
  10. J

    Overheat question

    thanks for all the replys, It actually turned out to be a combonation of things. The coolant was to full but not by allot. The main issue is someone had put the wrong radiator cap on the tractor. I went down to napa with my old cap and we looked up the right cap, there were simalar but not...
  11. J

    Overheat question

    Possible overheat question. I have been brush hogging my field, grass is thick this time hasn’t been cut in a few years. Using 5 foot hog have it set pretty high, also trying to keep the cut to about 2 to 3 feet wide per lap. A lap is about a quarter mile. Here is my issue. Fluid starts...
  12. J

    over ride clutch

    sorry orc can be pruchased from this site for 50 dolalrs approx.
  13. J

    over ride clutch

    orc purchased from here for 50 bucks, but it was a bit small for the 9n pto so i had to file it for about 3 hours to make it work. Local tractor store here sells for 75 I would day they are worth it.
  14. J

    Brush hog oil.

    I have an old brush hog, maybe 20 years old. I was towing it behind my N, for a while and the N needed a break. I just checked the oild resivor on the hog and it seems to be pretty dry, there is grim in there, but no oil to speak of. I have 90w gl1 gear oil, or I can run down to napa and...
  15. J

    PTO ORC will not fit.

    I honestly think the ORC is the wrong size. I cleaned up the pto really good and couldnt figure out for the life of me why it wouldn't fit. So i went down to the store to get a small 1 1/8 to 1 3/8 adapter so I could see where it was binding up. The new adapter slid on no problem at all.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top