Recent content by johndeerered

  1. J

    D17 tube

    It has one, I think I will take it off, I never use it anyway, thanks for the info
  2. J

    D17 tube

    Yea seems like it would be a life time deal,lol. Thanks for the info, I may just take the belt pulley off I have never used it. Thanks again
  3. J

    D17 tube

    I removed the hydraulic pump cover to change draft control seal and this tube was laying in bottom of cover. I can see a fitting on pump but any see anywhere for the other end to go. Anybody know what this is and were it connects to, any help is appreciated. D17 series 2
  4. J

    .125 rings

    I’m trying to find some rings for an unstyled A. It is bored .125 with 4 top rings and one ring on bottom. It has high compression aluminum pistons in it but I haven’t had any luck finding any .125 rings. Steiner and John Deere and a couple of other places I have called can’t help. Any where I...
  5. J

    4th gear walking out

    Yes just 4th gear
  6. J

    4th gear walking out

    I’ve got a 720 that will slowly walk out of 4th gear. If you slap it in pretty hard it will stay. Is there any thing that locks it in like a ball and spring to keep it in place or what do I need to look for. The lever also walks out with it, a little bit of pressure and it will stay also. Any...
  7. J

    Power block

    I have a 60 with a 6-3 power block and it’s getting water in left cylinder. I figure it has a pin hole in cylinder wall and if so is there anywhere to get replacement cylinders for it. Thanks for any info.
  8. J

    Power steering

    I’m looking at a little 430 tractor in the weeds and it has a decal power steering on it. What would be an easy way to know if it has it or not. Do they have belt driven pump or something else easy to see to know. Hope to get it out for better viewing. Thanks
  9. J

    7045 trans brake confusion

    Thanks for the help, I will get a manual coming. I read somewhere about a snap ring that breaks and has to be fixed to stop the grinding that may be one of the problems.
  10. J

    7045 trans brake confusion

    Got a 7045 recently and the trans brake and inching is getting confusing. It’s a 6 speed powershift with high low. It slowly moves forward with gear in low with power shift in neutral. When you start to move forward it lugs down a little before it starts to move like it’s in a bind. Seems to be...
  11. J

    Bill gears

    Anybody know if these have any gear reduction to them or is it 1to1. It looks like one gear may be bigger than the other but can’t really tell. This on a super m I think came from a cotton picker.
  12. J

    Picker tractor

    I was thinking a high crop picker tractor was a little different than mv. The picker had bull gears to reverse the direction and the mv had chain so it didnt change direction of travel I think. Im in north Louisiana
  13. J

    Picker tractor

    No certain plans just hated to see it go to scrap. Gonna try to see if it will run the exhaust was cover so maybe its not stuck to bad
  14. J

    Picker tractor

    The serial number is 17958
  15. J

    Picker tractor

    I got this super m what looks to be a high drum picker tractor. It has no pro so how did it run a picker. What did it use to hook up to a picker. Thanks for any info.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top