Recent content by Lee Cramsey

  1. R

    distrisbutor

    Im looking for the firing order on the distributor. i know the order on the motor. which is 1342 i need to know how the order is on the distributor. where one goes and 2 and 3 and 4 goes on the distrisbutor.
  2. L

    ot thom tractor company

    Any one ever heard of the Thom Tractor Company. I have located a tractor made by them that is similiar to an Allis Chalmers G. the tag says Thom Tractor Company. Can't find anything on the internet yet. Any help appreciated. Thanks.
  3. L

    Response to Brad in WI H alternator on 5-21-09

    I just installed a 1 wire alternator on my H. I spoke with K&W Auto Electric In Effingham, Il. first as they do all my starter and alternator work. They sell a small 1 wire alternator for 75.00. I installed this in about 30 minutes. All I had to do was twist the slotted adjustment bracket to fit...
  4. L

    ih 3500a backhoe

    I am in need of a hydraulic cooler that mounts in front of the radiator for a 3500a IH backhoe. If anyone can help me out please call 217 343 0413. I am also going to post a wanted ad, but I am in need of one pretty quick so I thought I would post here also. Thanks to all. Lee
  5. L

    1 pr picker weight

    Does anyone know the approximate weight of a 1pr corn picker. My grandfather has 2. 1 is worn out and the other is in very good usable condition. I would like to restore one. He says I can have them for scrap price.
  6. L

    815 Combine

    Rick, you can go to caseih.com and "search for parts now". Type in 815 and it should list all parts drawings with the different motor options. i did this for 715 and 403, to compare part numbers. you can locate the fan on both engine models and it should let you know if the part numbers are the...
  7. L

    1206

    I had a similiar problem on a 560. I had been turning it over with the starter but not real fast, then it quit. I assumed the starter went bad and had it rebuilt. Same problem when I got home. I switched batteries and still the same. I had painted this tractor and had "cleaned" under the washer...
  8. L

    560 farmall parts

    I am getting close to finishing the 560 I bought that was smashed by an overhead grain bin. I couldn't resist painting it while I had it stripped down. That is a big job. I still need a few parts. Oil filter housing, center strip, seat box, hood and battery covers. I've been checking e-bay. I...
  9. L

    m front cover

    I have a 400 with an M motor in it. You can make the pump work with a little time and ingenuity. Mine is temporary so I didn't want to change the front plate. I drilled the pump holes out as big as I could and installed a nut on the other side to pull it together. I am sure it could be done...
  10. L

    Farmall H drawbar

    I also have an extra one. I am in Central Illinois. E-mail if you are interested.Lee
  11. L

    6-12 volt H

    I did not want to ask this question because I thought it kind of silly. I am an electrician by trade but had never tried to run 1156 bulbs on positive ground. I am testing the voltage at the socket, between the socket and center post. That is why I questioned the bulb polarity. I put a 12 volt...
  12. L

    combine speeds

    Thanks to all. I will have the heads on. Highway about half the way, then I can take country roads. Lee
  13. L

    combine speeds

    How fast will a 403 and a 715 IH combine go. I have purchased 1 of each and will have to drive home. I was wondering about how long it will take. 30 miles. Also can anyone tell me about how much gas I will need. I am going to scrap them after I pull the motors. Other parts will be available...
  14. L

    Looking for 66 Piston Rings

    I bought mine at Napa. i might be able to find the part # if you like. Lee
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top