(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. K

    IH 2588 or 6088, and which 8 row head

    We are looking to trade combines. Currently running a 2366. It has about 5700 engine hrs and 3500 seperator hours and it's well past due for trading. We're thinking it would be wise to step up to a class 6 machine. Looking to spend about 100k give or take a little and get a machine with...
  2. K

    Turbocharging a 4010

    I'm planning on turbocharging our 4010. We recently replaced the engine in one of our 4020s with a combine engine. It had a 4320 (I think, hood wasn't cut to clear turbo. 2 piece manifold and airresearch Garret t04b) turbo kit on it. This particular 4020 is only used as a loader tractor nowdays...
  3. K

    530 occasional misfire/rough running.

    My 530 began having an occasional misfire the other day. Mostly happens under load, such as driving uphill. I believe it to be a spark issue as it smokes when it happens, and has no power loss when it isn't happening. Power comes back strong immediately once it stops. Intervals seem random, as...
  4. K

    Re: Best round baler for corn stalks

    We don't bale a lot of stalks so we just use the JD belt baler we have. It is a bit rough on the belts. Guys who do a lot of stalks around here have their preferred brand of nice belt baler for hay, and an old NH chain baler for the stalks. They bale loose, but the chains almost never...
  5. K

    Orshelens oil sale.

    Just wanted to let everyone know that my local orshelens in Red Oak IA currently has Valvoline 15w40 on sale. $10 per gallon and a mail in rebate lowers it to $5 a gallon. So if you have an orshelens near you it might be worth checking if they also are running the same sale and grabbing a few...
  6. K

    Orshelens oil sale.

    Just wanted to let everyone know that my orshelens currently has Valvoline 15w40 on sale for $10 a gallon and there is a mail in rebate to lower that to $5 a gallon. So if you have an orshelens near you it might be good to see if they are doing that deal too!
  7. K

    4630 bosch pump turn up/ 404ci hp limit

    This message is a reply to an archived post by dieseldoc on April 16, 2011 at 19:39:57. The original subject was "Re: 4630 bosch pump turn up 404ci hp limit". Our 4630 has had 240hp since 1980. Had to switch to synthetic oil to keep from replacing the turbo yearly. Also has a better fan, not...
  8. K

    What's your highest hour tractors without an overhaul?

    Just thought it would be a fun subject. Ours is a 1971 4020 M&W turbo 125hp with, as of today, 27,609 hrs and has never been opened up. Our other 4020 needed done at 18,000 and it doesn't even work as hard. I guess the 71 just had an ace checking the tolerances that day! The other one I'm...
  9. K

    Purolator filter numbers for H and M

    Just wanting to double check that these are the correct filter numbers for an H with short housing and M with tall housing before I order, as they aren't stocked locally. I got these by x referencing the different brand recomendations I have seen. Short- L30010, Tall- L40011. Surprised it was...
  10. K

    Looking for opinions on disc windrowers

    Our CIH 8312 disc windrower is on its last legs. I think we bought it new in 2002 or so and it's done at least a couple hundred acres each cutting every year since. So we are in the market to replace it, and I'm having trouble deciding what to go with. I know we want another one the same size...
  11. K

    Anyone use Hy gard in a 2cyl trans?

    So my 530 is leaking gear oil into the pto. I know I'll have to fix it eventually, however, it probably won't be until fall. I was recently reading a post on here where several members stated they used Hy gard in their pto with no issues. That got me thinking, could I just fill up the...
  12. K

    530 PTO seal replacement.

    Well, today I hooked the old ih 1300 sickle mower to the 530 to cut some ditches. As usual I checked the pto fluid before using the pto, and to my dismay was greeted with the smell of the new gear oil I put in the gearbox a couple weeks ago. I know this is a common problem, and have found...
  13. K

    Did some raking with my 530, and a tire question.

    Thanks to the guys who told me how to set my hydraulics up for a 2 hose cyl, I was able to use my 530 to rake 80 acres of hay the past 2 days. I had a blast! My poor dried out rear tires are starting to chip away though so it looks like I better throw on some new ones next year. So, it has 13.9...
  14. K

    JD Plow ID

    Hello everyone. I am wondering if anyone can ID this JD 3 bottom plow I have. I am leaning towards it being an F125 but would like confirmation. I would like to replace the bearings and I want to use the correct style decals once I paint it, so I would like to know for sure which model it...
  15. K

    530 throttle friction plate home repair.

    Today I fixed my throttle. I thought I was post a couple pictures of how I did it. This method has been mentioned here but I thought some folks would appreciate pictures. First, Remove your dash, tach cable, and throttle lever. There are already good explanations with pictures of that process...
  16. K

    Here's my 530

    Thanks for all the recent advice on my 530 guys. Heres a picture of her i took today before spraying some thistles after a fresh wash. She's no show tractor but I keep her looking decent and and hope to repaint her and replace a few worn bits like the seat and steering wheel before winter hits...
  17. K

    530 power trol issue

    Ok well, anyone who read my post yesterday knew I am trying to get the hydraulics going on my 530. I plan to switch to Hy guard, but the little disc I'm working on already had ND oil in the cyl, so I figured I would test it, as I just put new lines to the cyl. So I noticed a probelem. I hooked...
  18. K

    530 hydraulic fluid change

    Hi guys. Sorry if this has been asked a lot before. Im wondering where the drain for the hydraulic fluid is on my 530. I tried searching Google and only found pictures of Bs and they aren't the same enough for me to guess. Up until now I have only used a 3 point plow and pull behind sprayer, or...
  19. K

    Upgrading a 530

    Hello everyone. First post but have read a lot of threads here before. I am restoring a 1959 530 and was wondering what could be done to bump the power up a bit. Not looking really to pull it seriously or anything like that, but I figure if I'm going to go thru the motor anyways, i may as well...
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top