(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. D

    rest-o-ride

    Dean or someone said this is time consuming and expensive. Time is not on my side for sure. Trying to get pics on pc. If I could get a pic on seat flipped up and pic on front bracket and seat support. Thanks
  2. D

    Rest o ride rebuild

    Trying to upload pics. For the life of me can't figure out why I have 1/4" gap. Measured and measured on 971.4 and a half inches between stop and end of stud.
  3. D

    Sand blast cabinet Harbor Freight

    Read reviews. Got about 3 hrs. on it. Did the sealing up, which they give you, silicone. What has anybody done for light. Read some stuff on LED lights. Any other mods. Have been on you tube. This will not be used very much. Thanks!
  4. D

    White 2550 mower engine bog down

    Hit pto (blade) and bad. Will mow but just no power. She's 14 yrs. old. Tuchumseh 25 hp v twin. like it is starving for gas. New fuel filter. Took air filter off, which I need, blades, spin freely. Took belt off and engaged pto. not a clue there just engaged, Thanks for any other info or tips...
  5. D

    rest-o-ride base mount

    What the heck are the rounded studs holding seat brackets? Hot rivets? Ground both sides on parts seat, Drilled out part way with 1/2" and pounded out. Figured would do just grinding heads on one side and pound out, no such luck. Sawz all on other side to get off heads. Pounded out. No luxury...
  6. D

    Centurion generater will not start.

    Drained gas and put Stabil in after not starting. Couple months of not starting. Tried starting with ether,Got low oil sensor. Carb is scary looking with wires. Thanks for any help. Bypass low oil shutdown somehow?
  7. D

    Bushings on rest-o- ride

    Now what. Bushings won't go in. Guess drill out on base. Live and learn
  8. D

    Right worklight for '61 871 pic

    Is it right? Smaller mounting bolt and was not hollow, no switch when acquired. Mounting ring is small. took it off so long ago off 62 971. Thanks, Dave
  9. D

    871 rear work light

    Is the bulb frosted? what about the bolt to fender, wasn't hollow originally, but hole for switch on casing. Don't see many Fords around here, restored at least and letting this restore go to long, but money lets you down sometimes. College,Taxes, but no death thankfully. Yhanks for info. Dave
  10. D

    Rest o ride pic not Ford?

    Getting ready to tear apart for a few parts. Is it Ford?
  11. D

    Rest- O- Ride Rebuild

    Farmerized and good job. Ground it back to knock collers off they had. Thought this was what it was, till looked at oyher seat on 971, and bought bushing kit. This will be awesome, just dry fittng it all. Love brass on black.
  12. D

    Rest-O-Ride Bushing kits

    Anybody ever purchased a kit? High dollar it seems. This is universal? Can only see 2 different sizes on roll pins 4 total on my seat. Bushings are 1 1/4"? 46.00 and up. Bushings only would do. Thanks, Dave
  13. D

    SOS control selector

    One for sell on flebay. Same seller and selling 2 for right and left hand. pics turned around and what if he sells both, since these can be changed to left or right. Only one of everything else and shifter lever is only one, wghich I need one, since mine snapped on my 981. He wants 75.00 and...
  14. D

    Row crop pedestal spacing

    New bearings. Best could get back in with castle nut and all. Can we get any tighter? thanks, Dave
  15. D

    SOS idc verses ddc band adjustment

    Hope I got the abreveations right. Pre "62. SOS Adjustments are the same in to20 manual and a big boy manual. Just writtin different. Was told in a post a while back That adjustments were different for the different trannys. Anybody got the adjustments for the indirect drive clutch. Thanks for...
  16. D

    Battery hold down 871

    anybody got a pic of hold down? Just at bottom with short bolt and brace. Need a desent brace on bottom. Mine is wasted I believe. Thanks, Dave
  17. D

    Cold smoking pics

    Sunset on night of smoke. 30 degrees. getting ready for smoke with cold smoker and pecan pellets. Got 1# blocks of pepperjack, xtra sharp chedder, vermont chedder, cream cheese with some onoin soup mix sprinkled on top and boiled eggs. last pic all wrapped up and ready for fridge. Have to wait a...
  18. D

    Dennis carpenter worklight kit

    Has anyone ever bought the worklight kit? Wnts yoy to drill a 7/32 hole in bottom of fender and put rubber boot and this and thata.
  19. D

    Cold smoking

    Anybody do much of this? Getting ready to do pork belly. First time for me. Got the belly orderd. Have cure and pellets which are pure wood. Just can"t wait.
  20. D

    Blasting back of backing plate

    Made this little jig so to speak to blast tractor side of backing plate will put rag over top only 2 feet tall.( axle is 27") and hold her down while blasting. Whatcha think? oh yea rivets behind red stucco tape
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top