(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. N

    Cylinder Head Questions

    Hi Guys A couple of years ago I bought a semi basket case side mount 8n. Ive been getting it back together and finally tried to start it (I did put MMO in a while back). It spun like it had no spark plugs in. I took the valve covers off and all the valves were working except one. I then checked...
  2. N

    Carb question

    Hi all I have a 52 8n side mount I bought a couple of years ago and have been putting it together a little at a time. I took the carb apart a while back and am trying to put it back together but the jet under the main is too small to fit in. I can"t remember if it had one there at all. I know...
  3. N

    8n side mount coil position

    Hi everyone I'm putting together a side mount 8n and I don't see where the coil holder should bolt on. It looks like in the manual it bolts on with the spark plug wire holder but it seems like it wouldn't fit with the distributor right below. Does someone have a pic they could post to help me...
  4. N

    Bad running 8n

    Hi guys I have a front mount 8n with 12 v conversion. It has no power on high throttle and backfires. I"ve checked the archives and checked everything I could find. I"ve changed points, plugs ( gapped and rechecked) condenser, cap, rotor, coil, took carb off (twice) cleaned and rebuilt...
  5. N

    OT: Desperatly need electrical guru help!!

    Hi Guys, I posted a couple of weeks ago about charging the battery backwards in my 94 f250, finally had to get a new battery and it started right up except it is only charging at around 10 amps. Got an alternator from pull a part and did the same thing, so I exchanged it and it is still not...
  6. N

    Steel Wheel

    Not mine, just thought I'd share http://charlotte.craigslist.org/grd/2491638859.html
  7. N

    OT 94 F250 battery screw up

    Hi Guys I posted on the Ford board but knew you guys would probably know what to do. My 94 f250 has a slow discharge I can"t find and I let the truck sit a month or so and the battery was completely dead. I took the battery out and put it on the trickle charger. Took 1 1/2 days to get it charged...
  8. N

    Hydraulics question

    Hi guys, 49 8n front mount. Last fall I pulled my hydraulic pump cleaned and rebuilt everything and filled with fresh fluid. I haven't had much time to try it out, but today I put the mower on and tried to cut some. The PTO works fine but the arms would come up just a bit then the hydraulics...
  9. N

    Checking compression

    HI Guys I just got a tractor that hasn"t run in 5-6 years. I want to check the compression, so my question is do I put some ATF in there since it hasn"t run in a while? If so, wouldn"t that affect the compression numbers? Thanks for the help! Scott
  10. N

    Valve cleaning

    Hi everyone, I read a while back a thread on cleaning the valves. I just aquired N #3 and was wanting to clean the valves, among other things. I wasn"t able to locate it in the archives. Thanks for your help! Scott
  11. N

    Altenator problem?

    Hi Guys I thought my alternator wasn"t charging so I took it off and had it tested and supposedly it was ok. The gauge doesn"t move at all. eventually the battery goes dead. Any ideas? Thanks for the help 49 8n 12v
  12. N

    OT-1994 F-250

    You guys have helped me so much with my tractor, thought I'd try my luck. My F-250s battery has been going dead periodically. I go to start it and it is totally dead, will put in on the charger and it will start and be fine for maybe a week or so, then be totally dead. Anybody had this problem...
  13. N

    More clutch replacement problems!

    Okay, split the tractor, got flywheel resurfaced,replaced pilot bearing, throwout bearing. Put Flywheel back on, put disc and pressure plate on, snugged bolts down in star pattern, set torque wrench to 15lbs, put on first bolt and barely turned torque wrench and bolt broke off! when I took bolts...
  14. N

    Clutch replacement questions

    Well, I finally did it split the tractor to replace the clutch. I"ve searched the archives but can"t seem to find answers to a few questions. First, how do I get the throw out bearing out of the lever housing it is in? Second, does the oil seal just pop out and the new one pushes back in? didn;t...
  15. N

    OT hauling 67 f-100

    Hi Guys I'm thinking about buying a 67 f-100, but will have to tow it home, about 40 miles or so. I have a 99 Jeep Cherokee with 4.0. Would it pull it ok? Thanks for the help!
  16. N

    Hydraulics question

    Hi Guys, I did a complete rebuild on my hydraulics last fall. Dropped it, cleaned everything, new type cylinder piston, replaced all the moving parts and pressure relief valve. It waorks fine, smooth and lifts fine, but it goes down overnight, isn't it supposed to stay where you leave it? any...
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top