(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. urbancase

    Round baler laseing tool

    Made a tool to help pull belt together so you could lase it up. I could get with in 2 inches by myself but was over it. So made this to put on each end and pull together with bolts. The one in the pic is my second try as I had to modify. Had grandkids helping and for the most part it was...
  2. urbancase

    Round baler maintenance

    My weekend project, noticed when I put the baler away one bottom roller was not spinning. So stripped the bottom out as I have found one drive bearing on the drive side was tight but still spun and the front idle roller the left side bearing was gone. Just glad it did start a fire.
  3. urbancase

    1570 hyd line

    Halfway during planting my 1570 blew the main charge line under platform, left side of tractor. Case says the line is no longer supported and no aftermarket. See if someone here has one. It’s the line with the 2 bolt flange and flat face with o ring.Thanks and post back if you do.
  4. urbancase

    Done planting corn last week

    I pick up a few tractors this winter and this winter when I posted a few asked for a report out how it went. The versatile 876 did great with 13 shack chisel and used it on the 15 foot field finisher in have didn’t know it was back there. Next winter plan to find a 30 footer. The 2590 case ran...
  5. urbancase

    Transfer pump

    Been wanting one for awhile , was in rural king and had one on the shelf, 20 volt, and the impeller is serveable . Says clear water and water glycol mix. Be handy at times.
  6. urbancase

    Versatile 876

    Figured I reach out to the group, my first one. Hope we can get in the field this week, and filters and fluids are changed Wish me luck.
  7. urbancase

    2590 hyd level

    The 2590 I picked on auction this past winter is in the shop getting all filters changed, changed the hyd filters and the going to check site glasses on left side like my 1570. Well no site glasses so pulled the fill plug and wonder if it had a dip stick. Don’t look like it did, what am I...
  8. urbancase

    Our farm’s new horse

    Our new to us tractor was shipped in Wednesday, versatile 876, I want to go back to some tillage as been no tilling for 20 years. This will pull the 5 shank ripper right and I had to remove 2 shanks to pull with our 2470. I figured I would post as I think we all like tractors, and it shows no...
  9. urbancase

    Gas cans a few weeks ago

    Here what I use, I would think they were sold nation wide, I have around 6 or 7. Have old time vent on them, and do not have all the EPA stuff on them. Was in TSC and walked past them. Figured I post as I comes up every so often.
  10. urbancase

    Auction tractor

    This tractor was on the auction i bought the boom lift on, I watched it and picked it up as I wanted a cab tractor for the planters. Didn’t overpay and back tires are better then 80% tread, they said on listing everything worked and I had it delivered at the shop and drove home rest of the way...
  11. urbancase

    Mill project

    Lathes are brought up a lot, few weeks ago post on v ripper, made two straight shanks to replace the bad ones. Cutting angle so you can reset if it kicks out. Figured I give it a try and see how it works copy the idea of another company’s ripper shanks.
  12. urbancase

    Condor 46-Q8 boom lift

    Picked up on an auction and got a good price, needs new battery but everything works as it should. Only problem is I one drive motor is cracked, they are pricy new. However it makes life easy as I still climb ladders but like it less ever year. Figured I post this to see if anyone would by a...
  13. urbancase

    V ripper

    Hey guys I bought this v ripper on a auction few years ago, want to use this year but the is no mfg tag on it as it has one broken shank and one that been welded, going to take a good one off and have 3 new water jetted at the shop. How ever the replaceable tips have not tried look up but I...
  14. urbancase

    Versatile 855 series 2

    Anyone have good or bad, looking for a big horse like this need to change tillage methods as the rains we get anymore need to break up ground as I no tilled for over 20 years. This is a geared tractor and mechanical I can work on, the electronics on some of my tractors just add to headaches. So...
  15. urbancase

    875 mulch finisher made by land all

    Does anyone on here have a good or bad, looking to make a deal on one soon. It’s a 30 footer, it does not have the sweeps on back for leveling but I can come up with that. Thanks in advance for input
  16. urbancase

    Should have listened to that little voice

    20 sec before this happened I thought to my self I have to many draws open. In a hurry and boom. Now the fun begins get it all back we’re it should be.
  17. urbancase

    Line plugs

    Found these at harbor freight, kit with tapered plugs, I used them to plug lines when did clutch on 986 and today rebuilding feeder house reversers on combine. plugged the hyd lines so they don’t get dirt in them. Figured I let people know and make life Easier.
  18. urbancase

    Working on chopper blades in combine

    I figured it would not be a bad job, as I have the top shive out and found bolt came Lose on frame of shive. Blades were wore down on one side and figured my chance to do it, however limits on tools to get in there. Using breaker bar and 6 point socket and 3/4 line wrench to get lose then 3/8 20...
  19. urbancase

    7000 planter 2 by 2 by 2

    looking to next year as i had 2 7000 planters, one was old and sat the other was newer set up for no till and finger pick up. i took the old one apart last year and save anything that was worth while. i am thinking of of mounting the fertilizer bar from the one i took apart 6 inches forward of...
  20. urbancase

    A nice pic of a group of my tractors

    Done round baling for the day and pulled up to work shop and let tractor cool then I jumped in the pool wife had a half hour before supper was ready. Any way after we ate and cooled down went back to the shop and it was not planed but looked neat to me, figured I share. C80 with 3650 round...
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top