Anonymous-0
Well-known Member
Hello all. In early spring i puchased a 62 model 830 for $1200. It had a good running diesel engine, but virtually no brakes.
After pulling the brake covers i found everything covered in grease and rust. The shafts themselves were severely worn. Now i have new disc, seals, and the shafts are at the machine shop. My question is how do i determine which balls i should use?
After pulling the brake covers i found everything covered in grease and rust. The shafts themselves were severely worn. Now i have new disc, seals, and the shafts are at the machine shop. My question is how do i determine which balls i should use?