(quoted from post at 05:46:26 03/23/14) Trade up to a discbine! LOL
Seriously, I use a 4&1/2" grinder, but I've seen old timers use a flat file!
I also have one of those "handy dandy" tools for replacing sections without removing the knives from the cutter bar.
Edit: Just to clarify what we're talking about
Section = triangular blade attached to knife/knives
Knife/knives = moveable bar that sections attach to
Cutter bar = stationary bar with fingers/guards that knives slide into
HTH, Dave
(quoted from post at 05:46:26 03/23/14) Trade up to a discbine! LOL
Seriously, I use a 4&1/2" grinder, but I've seen old timers use a flat file!
I also have one of those "handy dandy" tools for replacing sections without removing the knives from the cutter bar.
Edit: Just to clarify what we're talking about
Section = triangular blade attached to knife/knives
Knife/knives = moveable bar that sections attach to
Cutter bar = stationary bar with fingers/guards that knives slide into
HTH, Dave
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy