Ford 335 tractor Clutch rebuild Tool Set No. 2142

[Badger33]

Ford 335 tractor Clutch rebuild Tool Set No. 2142 to rent or Buy
Thanks Andy
Kingston Ontario

 

[shaun wallace]

That is going to be hard to come up with as only dealers have it and there is a lot of components to it. If doing a dual disc assembly it can be done using flywheel. Have to make 3 allthread bolts to disamble and use one leg of 1/8 cotter key for setting gap on links.

 

[Badger33]

That is going to be hard to come up with as only dealers have it and there is a lot of components to it. If doing a dual disc assembly it can be done using flywheel. Have to make 3 allthread bolts to disamble and use one leg of 1/8 cotter key for setting gap on links.

Ok thanks

That is going to be hard to come up with as only dealers have it and there is a lot of components to it. If doing a dual disc assembly it can be done using flywheel. Have to make 3 allthread bolts to disamble and use one leg of 1/8 cotter key for setting gap on links.

The clutch works fine for the drive and the pto but the pto will not disengaged when clutch pedal depressed
Have to start my tractor and mower with pto ingaged

 

[shaun wallace]

Trans disc is about worn out. While in there replace links and setscrews. Wont have to dissemble clutch unit to replace trans disc.