cartman_1143
New User
Bought a great running Ford 600. After about an hour of use I parked it and it wouldn't start. Everything looked good so I started throwing parts at it. New coil, cap, rotor, points, plugs, plug wires, carb, and wiring to coil and to distributor and it still wouldn't run. When I purchased it the man told me it had quit running due to a limb knocking the distributor cap off. He put the cap back on and it ran fine. While changing all this out I found the rotor button was stripped was the reason it quit running. It has all these new parts and still won't run. Timing has been checked as well as distributor for slop. All looks good. Seem to have great spark at coil and points but no spark from rotor cap. Could the cap be defective? Any ideas would be great.