(800) 853-2651
SHOP NOW

Recent content by Ck1

Yesterday's Tractor Forums
  1. C

    crank gear assembly order

    Thanks. I should have it most of the way together tonight Chris
  2. C

    crank gear assembly order

    ok, so the part on the left is for the camshaft. Correct? which direction does it go on? Thank you
  3. C

    crank gear assembly order

    I just got my parts back from the machine shop. I left the crankshaft gear on the crank when I took it to the machine shop and can not determine what order they go back on in. I can't find it in the search or the IT manual. Thanks Chris (in Michigan needing to get this back together to...
  4. C

    Front suspension pivot pin

    Does anyone know if the stock front axle pin looks like the picture on the yt store? http://www.ytmag.com/store/parts/pics/wm_2N3126E.jpg I have a 2n with a Dearborn loader. It has a front mount hydraulic pump. The pin has a hole all the way through it unlike the picture. The bushing was...
  5. C

    5ft Bushog with a 8n rractor

    no problem. I used mine all last summer with the ORC and chains as Bruce suggested with no problems. My engine was way down on power too. I only had 75,40,50,75 psi of compression. Sometimes I had to get it into first gear on the hill to keep the rpms. I am hoping with the rebuild I am...
  6. C

    OT - The Vertical Farm

    It may work on a small scale on someones patio. However, there is so much wrong with that from a production farming level. Starting with planting. I am assuming that they would use hydrophonics since enough dirt to hold the nutrients needed would be heavy and require machinery to work the...
  7. C

    Dearborn snow plow on Dearborn loader

    I have a Dearborn snow plow on Dearborn loader mounted up on my 2n. This is the first time the plow has been on since my dad last had it on about 30 years ago. Since I was only about 8 then, I didn"t quite remember how it went on. I managed to get it mounted up but it seems really wacky...
  8. C

    Hood removal with loader???

    I pulled the hood off my 2n with a deaborn loader on it. It was very difficult to do be myself. If the paint is good, I wouldn't try it without a hoist.
  9. C

    Deaborn loader question

    Wow, thank you for the link to the manuals. I also have a Dearborn loader (19-8A)that I have no manual for. My great grampa bought the 2N new with the loader. He gave it to my dad over 30 years ago. My dad gave it to me a few years ago just before he died however he only had the standard...
  10. C

    question about brush hog and 9n

    at TSC, they are more expensive (~$130) than at the message board host. I am using an ORC that I bought here and it works good.
  11. C

    rebuild questions

    so now that I have my 2n running pretty good, I have low oil pressure. With 20W50 in it, it starts at 35psi and drops to 10psi as it warms up (at 3/4 throttle). It is loosing oil but I have been just topping it off each time I use it. The #1 cyclinder has quite a bit of oil on the plug...
  12. C

    PTO Guard

    Now that I have an ORC from our host here, I was wondering what people do to cover it when your not mowing, etc. Or, do you drive the roll pin out after each use? The stock threaded in protection is really nice. Turning off the PTO isn't really an option since you loose the lift. Neither is...
  13. C

    PTO Adapter

    ordered an ORC from this sight and will return the ORC that I bought locally. Actually saved me ~$80. I really just wanted to know the failure mode of mounting it at the mower gearbox. Sorry, I am an engineer and just need to know :)
  14. C

    Ford 8N rebuild

    ok, dumb question, how would you get 120psi on a compression check with only a 6:1 compression ratio? 14.7psi * 6 = 88psi I know that the fuel will have a slight affect.
  15. C

    PTO Adapter

    so why should I run the ORC at the tractor end of the PTO shaft?
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top