(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. E

    Harmonic balancer puller; what do you use?

    I am disappointed at how little it took to strip out the duck foot on my harmonic balancer puller. What have you all had good luck with?
  2. E

    Ford 3000 select o speed speed chart

    Anyone got one of these models? I am looking to replace the torn oem or the replacement that may or may not be correct. It is a 1966 vineyard or narrow model. Belgium made. Anyone know the difference between vineyard and narrow?
    • ErnieD
    • Thread
    • Replies: 1
    • Forum: Ford
  3. E

    Farmall M w/loader, what hydraulic oil?

    SIL has a M with loader. Father said to use 10W non detergent oil. Very difficult to find. I am a Ford guy, any recommendations?
  4. E

    Help identifying 3000 narrow

    I have a 3000 that needs brakes. Two 1.5" brakes are listed depending on year. The serial number on the rt side are BO26 and A127-031. It is Belgium narrow machine with SOS. Left side under the hydraulic pump is 74-01. Any insight is greatly appreciated.
    • ErnieD
    • Thread
    • Replies: 10
    • Forum: Ford
  5. E

    Chevy/GMC tailgate Random Drop

    My GMC 2021 has dropped the tailgate twice, and there is a recall.... but my vin was not in the recall. I took the inside plastic tailgate cover off and inspected the switch. Pretty much like the keyfob of 20 years ago, gold grid which is activated with a carbon wafer. I cleaned it up, applied...
  6. E

    Ford 5000

    My brother sold my father's 5000 in 1984 to buy a Massey 1100. The 5000 was a 1965 and was a nice step up from the 851. Saturday I was playing Euchre with a group of farm friends and the topic of where our father's worked. I mentioned my father drove bus at Cattaraugus Central, one fella...
    • ErnieD
    • Thread
    • Replies: 0
    • Forum: Ford
  7. E

    Ford 3000 power steering New fuel pump won't prime

    Took the control valve apart and found 2 of the 3 springs broken. Replaced springs and resealed the control valve and sector box. Now have good power steering to the left, but no power assist to the right. The fuel pump was bypassed with a rubber line. Replaced the fuel pump and can not get it...
    • ErnieD
    • Thread
    • Replies: 3
    • Forum: Ford
  8. E

    Ford 3000 gas timing window

    My IT service manual says it is on the right side, at the flywheel. Looked/examined twice, not there or the left side. The rig is a 1966....
    • ErnieD
    • Thread
    • Replies: 3
    • Forum: Ford
  9. E

    3000 back home

    Ford 3000 that dad bought in 1872, a 1966 model. Brother had engine overhauled about 10 years ago. Changing fluids, my questions are: It had orange antifreeze, I am inclined to put green in, on fourth flush and rust still coming out. No puke tank. Charging voltage is 15.5 with a new battery...
    • ErnieD
    • Thread
    • Replies: 5
    • Forum: Ford
  10. E

    Ford 871 charging system 6V

    I am having troubles with my 871 generator charging system. I have checked the generator brushes and commutator and they are in good shape. I have a new wiring harness because the old one was frail. The voltage regulator will cause the dash light to go out if I manually operate the cut out coil...
    • ErnieD
    • Thread
    • Replies: 5
    • Forum: Ford
  11. E

    Re: M charging Trouble Shooting

    To John T You hit it right on the head, ran a ground wire to the 4 position switch and all is well. Thank you for your insight.
  12. E

    M charging Trouble Shooting

    First off I am a little outta my league with a Farmall. SIL has a 6V positive ground M generator with a cut out relay on the generator and 4 pos switch on the dash. A lot of the wiring was butchered and or missing. I replaced the abandoned wires and verified wiring with online schematic. I...
  13. E

    Ford 3000 Holley Carb

    I have a 1966 3000 carb, not free, from my brother's widow, small token plus shipping. Ran poorly when removed, new one from this site fixed it up.
    • ErnieD
    • Thread
    • Replies: 7
    • Forum: Ford
  14. E

    801 PTO Shaft

    Twisted the spline end of my 861 pto shaft. Was running a 6 foot roto tiller and hit a few good sized rocks. The manual notes the heavy duty induction hardened shaft is available for shock load applications, Are the after market shafts heat treated? Any advice or information would be welcome.
    • ErnieD
    • Thread
    • Replies: 1
    • Forum: Ford
  15. E

    Fuel Line

    Monroe County (NY) is sold out of 1/4 5/16 3/8 fuel line.
  16. E

    OBD Code scanner recommendation so far

    Pulled the trigger on the Foxwell 630Plus and returning it. I liked the idea of being able to update codes from the internet. In reality it is difficult to sync and each model year/car type can have 3-10 files to download. The Foxwell website says to refer to Amazon for Tech Support and Amazon...
  17. E

    OBD Code scanner recommendation

    My cheap code scanner is up for replacement. Any recommendations? I am leaning towards the Foxwell brand.
  18. E

    Replacement Ford pull combine canvas

    I am looking at a Ford 16 pull combine. Old canvas is gone. Any advice is appreciated.
  19. E

    '49 Dodge Update

    New fuel pump, new coil, and carb rebuild and it runs! Got it to run a few seconds on bypassing the ballast resister; bought a coil w/o external resistor. Carb was a disaster inside and one check ball was missing. No narcotic like success.
  20. E

    Lead Free Solder

    Just bought a 1# roll of lead free solder. $34! Yikes.
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top