(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. I

    350 diesel question

    Can anyone tell me if the starter and hydraulic pump interchange between the 350 diesel and gas?
  2. I

    Continental diesel help

    I’m looking for some help locating rod bearings for a continental gd193 that was installed in the 350 diesel tractor. The bearings I’m looking for are for .030 undersized journals. The federal mogul part number is 2920 cp-30. I have .020 but need to clean up the journals. Any help or leads...
  3. I

    Wheel weight bolts

    Can anybody tell me the length the wheel weight bolts are for the split weight for a 1256. I believe they are square head. Anybody have a good source?
  4. I

    Ihc 450 wiring diagram

    Would anyone be able to help me find a wiring diagram (complete) for a 450 row crop Farmall tractor. I bought a harness a few years back and the schematic they provide is unreadable. Most of the existing wiring is gone so what I would like is a diagram with color code. It has been converted...
  5. I

    H wiring diagram

    Anybody have a wiring diagram for a H Farmall using a one wire alternator running 12 volts?
  6. I

    Looking for parts

    Im looking for a D282rebuildable block and head from a 706 or 656. Closer to east central iowa the better. Thanks for your help
  7. I

    Help on a 425 mower

    Question. I appear to be getting oil in my radiator on my Kawasaki liquid cooled motor. Not antifreeze in the oil, oil in the antifreeze. It was also running on the hot side. I had a mechanic put new head gaskets on it thinking that was the problem. Flushed the system with water. Started...
  8. I

    Ihc 350 diesel

    Any of you have or know somebody that might have some 350 diesel parts. Looking for engine (continental gd193) and sheet metal parts. Might consider entire tractor. Thanks for any help.
  9. I

    F350 continental diesel motor

    Anybody know of anyone who can source parts to overhaul my continental gd193 diesel motor? Not having any luck with sleeves or pistons. Any help appreciated.
  10. I

    Front rims

    Im cleaning up and painting the front rims of my Farmall 350 row crop. Can anybody shed light on what the correct color should be? Or what you use? They are silver in color now. Thanks for your help.,:
  11. I

    Paint question

    Can anybody tell me what color the front rims on a 240 utility should be painted? Cant tell by looking at mine. Thanks for your help.
  12. I

    Sherman step up trasmission

    Freind of mine is working on his 48 8n step up Sherman transmission. Had the cable shift and it continually popped out. Could adjust the cable either way and it would pop out. He is going to covert it from cable to lever shift. Not sure if this will help or nor. The unit he has does not...
  13. I

    350 row crop steering shaft

    Have a 350 narrow front that the steering shaft I going through the bolster is locked up. I took out the shaft that runs through the radiator so I could remove the shaft going through the bolster. I can’t get the bolster shaft to budge downward. I have soaked it with pb blaster drove down on...
  14. I

    B or c loader fabrication

    Anybody fab a loader or snow pusher for a Farmall b or c? I’m thinking more of a snow pusher and would like to know if anybody has built one and has plans. Thanks for any help.
  15. I

    B414

    Chance to buy a B414 for 1600. Tires are good it runs. Were they a good tractor? Looks like a handy acreage tractor. Doesn’t have a two point or three point. Which hitch would have come with it originally? Does it seem like a decent price? Thanks for your help
  16. I

    Charging 856

    Recently purchased an international 856 diesel. The batteries are less than 2 years old and not holding a good charge. It has 2 6 volt batteries connected in series to produce 12 volts at the starter. Owner told to charge the batteries on the left battery at 12 volts. Is this right? I...
  17. I

    Engine swap

    I have a 1964 Loadstar 1600 with 304 V8 and was wondering if any Diesel engines would replace it without a lot of machine work. Any help or insight appreciated.
  18. I

    240 govenor

    Plowing snow other day with 240 utility. Running wide open throttle. All of a sudden the tractor rpms dropped to idle. Original thought was the throttle slipped to idle. No such luck. Second thought was the linkage came off the carerator. Doesn?t appear to be the case. Revs up if I...
  19. I

    350 steering issue

    350 row crop that won?t steer. I have removed the shaft with the worm gear, and it appears the bolster steering shaft is frozen up. I removed the nut on the top of the bolster shaft so that I can remove the shaft. It won?t budge side to side or up and down. I have soaked with pb blaster...
  20. I

    240 utility hydraulic question

    Where do you check the hydraulic fluid level on a 240 utility with live power? Also where do add fluid? Is it the mall round cap in front of the live pump? Thanks for your help
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top