(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. I

    2166 rock trap

    Looking at a 2166 just wondering about the rock trap. How important are they. And can they be added
  2. I

    JD 6620 to CIH 2166

    We are currently running a 6620 sidehill and are thinking of up grading to a case ih 2166. Wondering on what people know about the up grade and if any one knows about using a bish adapter. And if any one knows if the 915f head I use now could be used on the 2166. Mainly the guidance...
  3. I

    JD 6620

    Doing beans with my 6620sh and I keep losing cylinder speed I have to keep bumping it back up. Is this a belt issue or a hydraulic issue on the sheave? Thanks
  4. I

    Battery terminals

    Looked at an old 2+2 that has been sitting a long time. Engine is free does anyone know the likelihood that it got water down in the engine? And it got batterys that got top post threaded studs and use an eye on the cable. Never seen that before was that common?
  5. I

    Tach repair

    Does any one have a number of someone who repairs tach's. I have a early 06 tach that needs repair
  6. I

    M grounding

    Wondering if anybody could tell if a 52 M was a positive or negative ground or how does one tell if it is hooked up correctly. Got a friend got one given to him so I know nothing about it
  7. I

    1456 blow by

    Have a 1456 project we bought it runs nice starts good ever in cold weather . but it has a lot of blowby . my question is Could the blowby be coming from any where else besides the rings . just want to explore all options before we do a overhaul . like I was told one time once you start taking...
  8. I

    1206 starter

    I have a question on a starter on a 1206 . the starter starts to engage but after a turn of the engine or so it spins or free wheels. Seems as through the electric part works fine . is the gear drive the problem that I could just replace that and see if that fixes the problem before I...
  9. I

    6620 hydraulics getting hot

    Got a 6620 that the hydraulic oil gets hot. Cooler is clear don't really know where to start ? could it be the sending unit? Any help would be great. Thanks
  10. I

    H coil

    Question on a ignition of a H should I have power on both terminals of my coil
  11. I

    1206 with a miss

    I'm back to trying to find a miss on my 1206 . my questions are has anybody ever had a miss caused by something on a injection line . and how can you tell if they are free besides blowing air through them
  12. I

    1206 with a miss

    Ok for those who have experience in the 361-407 world I have a delimia. To start from the beginning my son and I bought a 1206 as a project in pretty wrough condition. We done a dozen or so of these so the condition really didn't scare me. So we overhauled the engine by that I mean piston...
  13. I

    1206 check valve

    I have a 1206 that isn't running the way it should. Coming off a fresh overhaul seems to have a miss to it . not getting much out of breather tube so I think compression is ok. Had the pump and injectors thru a shop so thinking they are good want to check the check valve on the return...
  14. I

    8o6 compression

    How does one check the compression on a 361 diesel. Do they make a tester or do you have to convert an old injector. And does anyone know what its supposed to be.
  15. I

    1206 brakes

    I have a 1206 And the brakes don't hold pressure or something on that order. They work but the first time you push the peddle its soft a has to be pumped once before you have brakes it Don't seem to be air because I've bled them several time and don't get any air out or get it to help...
  16. I

    Farmalland 1206

    If anybody knows who was bidding on the 1206 at farmalland let me know I got one just like it my son and I are just finishing up a restoration on and would part with.
  17. I

    DT361 engine oil pump

    Is there anyone out there that has any knowledge on the oil pumps on a 361. I've got a 1206 that I overhauled and spun a rod bearing at about an 1 hour of use. The rod bearings look like they where starved for oil. How can I tell if my oil pump failed ? I'm afraid to start it that the damage...
  18. I

    414 cylinder head

    Is the cylinder head on a D414 from a 966 different then a DT414 from a 1086 that is turboed
  19. I

    361 piston

    Just a quick question is it at all possible to change a piston in a 361 from the bottom with just taking the crank out and not taking the head off
  20. I

    6620 hydraulics getting hot

    I have a 6620 sidehill that my hydraulics have started getting hot on it. I have changed filter and oil no change . have been running a 915f on it after about one hopper the light comes on. Any suggestions where to start looking.
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top