(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. M

    My 180 is about done

    About a year and a half ago I took a chance on a Massey 180 at the scrapper it looked too straight to cut up, it has taken more time and money than I thought it would, but it has been a fun learning experience having never been around Massey Ferguson before. It seems to be a good running tractor...
  2. M

    Restoring hood ornaments on a Massey 180

    Does anyone restore the hood emblems for Massey tractors? The ones on my 180 were flaking, I repainted them and they are kind of marginal.
  3. M

    Hydraulic valves on Massey 180

    I have a Massey 180 with the two remote auxiliary valves, one appears to be set for one way operation and one is set for two way, I would like both set for two way, I have found the two slotted pins in the front of the valve and believe this is where the adjustment is made but would like...
  4. M

    fuel door fasteners on Massey 180

    working on painting my 180 the fuel cap flap on the hood is missing its"thumb screws" that hold it closed, does anyone have a source for them? Also where does the hood weatherstripping go on the hood it was either missing or I've forgotten where it goes. Thanks Mike
  5. M

    DC at the scrap yard

    I was driving past the local scrap yard and spotted this, I believe it is a 1941 DC in reasonably complete shape, my guess is the wide front is a later addition as it has the curved steering arm but don't really know. The chrome on the hood is in nice shape as is with chrome on the headlight...
  6. M

    Air intake hose question

    I would like to find a replacement middle intake hose for my Massey180 with a perkins gas motor, I'm not having much luck finding a part number or a source for it.
  7. M

    Rim lock question

    My son and I were working on a Massey 180 and a 65 getting good back wheels on both and found there are two different types of rim locks on the power adjust wheels, one where the holes are drilled perpendicular to the rail and one where the holes are drilled at an angle through the rail, why the...
  8. M

    What color should these be?

    I'm painting my 180 Massey and have a question, The wheel wedges on the power adjust rims are totally rusted over so I can't tell what color they were, my guess is silver but not sure.
  9. M

    Transmission plug on Massey180

    I'm working on getting ready to paint my Massey 180 and while cleaning I noticed this plug in the upper left front corner of transmission and wonder what it is for.
  10. M

    Pilot hole for a Massey 180 front wheel

    I have a Massey 180 that I am working on and have found something puzzling, one of the front hubs appears to be machined for a 4" pilot hole and the other one is machined for 4 5/8 pilot. Did Massey have bespoke front rims on their tractors?
  11. M

    What is this electrical part on a Massey 180

    I am working on straightening out the electrical system on my Massey 180, most of this looks pretty straight forward, butI dion't know what this part is or does and the wiring diagram doesen't appear to show it ,could someone please enlighten me?
  12. M

    Your a case nerd when

    I was taking a defunct washing machine to salvage when I spotted this, don't have a lot of use for it but it sure would be fun to play with!
  13. M

    Questions on MF 180

    I have spotted a reasonable looking 180 at a local salvage yard that looks to be in reasonable shape and might make a good plowing match tractor. I am curious about the hydraulic capacity and can power beyond be added to the hydraulics, It is a four cylinder gas motor that is free, supposedly...
  14. M

    A good weekend project and a unicorn saved

    My sons found this model 80 combine on facebook and decided to save it, it is in very good shape as it was shed stored its whole life and looks to have been well kept. Ive never heard of a model 80 before and can find very little information on it so it seems to be kind of a unicorn, does anyone...
  15. M

    A nice 39/40 DC for sale

    The local antique club is having a consignment sale this weekend and has this nice 39or 40 DC on it and thought someone might be interested, also a nice 4-14 model A plow with a CASE/ Cessna cylinder on it.
  16. M

    Learn something new every day

    After following the spark plug thread below I found out some DC's had thermostats, something I didn't think happened , my 49' DC has the 5414A elbow with no thermostat, would it be possible to machine this elbow for a thermostat? I use this tractor in the fall and winter to auger corn and using...
  17. M

    Found nice CASE disk

    I had been sort of looking for a 10 foot disk to pull with the DC and CC just to have something to give them a work out once in a while. I came across this model S at the estate of a fellow CASE collector, for being the better part of 70 years old it is in remarkably good shape, no breaks or...
  18. M

    Rod and main bearing clearances for a CC

    Its been 50 years since I last painted my CC that has been in the family since new, the paint is getting pretty rough and there is a pin hole in the exhaust manifold that needs to be fixed, and i thought as long as I was going that far I might check bearing clearances while I do prep work on the...
  19. M

    A good job done with the DC

    A short video of the DC earning its keep a couple of weeks ago. It augered 24000 bushels of corn over about a week, it just sits there and purrs along all day long. It was in the 20's and 30's then, they are talking -12 most nights this week, glad the job is done! Mike
  20. M

    New uses for old parts

    Several years ago my sons built a free standing vice out of an old machine stand, a plate that had been used in a hitch for a tractor i'd restored for a friend and a cheap Harbor Freight vice. I wonderd how useful it would be, turns out it is handier than a pocket on a shirt, it makes a great...
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top