my tractor quit. when checking voltages it looks as those my condenser is bad. no spark at all at plugs.
bought a complete tune up kit. install new points--set at .020, installed new condenser. cap and rotor. i
dont think as long as the clips are lined up and snap in correctly you can get your distributor cap on
wrong. correct me if im wrong. put on new wire from coil. havent installed new wires or plugs yet. wanted
to see if it would run. took plug out nearest radiator. got fire now. tried to start. darn no start.
suspect i messed the wires all up so can one tell me the firing order and where does the no one wire go or
maybe if you have a photo it would help. i thought the firing order was 1-2-4-3. sure could use some input.
getting gas okay. thanks for reading.
bought a complete tune up kit. install new points--set at .020, installed new condenser. cap and rotor. i
dont think as long as the clips are lined up and snap in correctly you can get your distributor cap on
wrong. correct me if im wrong. put on new wire from coil. havent installed new wires or plugs yet. wanted
to see if it would run. took plug out nearest radiator. got fire now. tried to start. darn no start.
suspect i messed the wires all up so can one tell me the firing order and where does the no one wire go or
maybe if you have a photo it would help. i thought the firing order was 1-2-4-3. sure could use some input.
getting gas okay. thanks for reading.